RecallLookupالعودة إلى مدقق المنتجEU Safety Gate · 2026-01-01 →
تصفح تنبيهات بوابة الأمان الأوروبية التاريخية التي تم التحقق منها. يرتبط كل إدخال بمصدره الرسمي المحدد.
The rate of nickel release is too high (measured value up to 61 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The rate of nickel release is too high (measured value up to 79 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The rate of nickel release is too high (measured value up to 76 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The rate of nickel release is too high (measured value up to 33 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The rate of nickel release is too high (measured value up to 49 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The rate of nickel release is too high (measured value up to 49 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The rate of nickel release is too high (measured value up to 90 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The product has a long drawstring with free ends at the level of the neck. These drawstrings can become trapped during various activities of a child, leading to strangulation. The product does not comply with the General Product Safety Regulation nor with the European standard EN 14682.
The user could easily detach the cover of the product, leaving live parts accessible. The user may therefore receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598-2-12.
A touch condition between the diesel fuel tank and the DCIV bulkhead bracket bolt may cause damage to the fuel tank over time and fuel to leak onto hot engine or exhaust components. As a result, the leaking fuel may ignite and result in a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product has a protruding part (the turtle head) that is too long. Small children may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (geometric figures) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
According to the list of ingredients, the product contains butylphenyl methylpropional (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The rate of nickel release is too high (measured value up to 104 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The product expands in size when in contact with water. If a child puts the product in the mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. The product does not comply with the General Product Safety Regulation.
The rate of nickel release is too high (measured value up to 89 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The toy has small parts (decorative sticker) that can easily detach. A small child could put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product has small parts (sticks/balls and rings) that may easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The impact absorption capacity of the helmet is insufficient. In the event of an impact, users may suffer head injuries. The product does not comply with the Regulation ECE 22-06.
The battery compartment screw has no locking mechanism and can therefore easily open, leaving the batteries inside accessible. A small child may put the batteries in the mouth and choke on them. The product does not comply with the requirements of the Toy Safety Directive nor with the European standards EN 71-1 and EN 62115.
The toy has unprotected protruding parts that may lead to injures or cuts to a small child. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The lining material of the rain wear has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP)(measured value up to 3.6 % by weight). This phthalate may harm the health by causing possible damage to the reproductive system. This product does not comply with the REACH Regulation.
The creepage and clearance distances between power and welding circuits are inadequate. Moreover, the electrical strength of the device is inadequate. Live parts of the device may become accessible to the user which may result in an electric shock. The product does not comply with the requirements of the Low Voltage Directive, nor with the European standard EN 60974-1.
The circular saw blade is marketed as an attachment that can be mounted on an angle grinder and the device could therefore, contrary to its intended use, be used as a hand-held circular saw. This could cause kickback or loss of control over the tool, resulting in injuries. The product does not comply with the requirements of the Machinery Directive.
The hanging musical mobile has small parts that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The soother holder is too long and it may become entangled or form a loop around a child’s neck. This can obstruct breathing and cause strangulation. The product does not comply with the requirements of the Toy Safety Directive.
The crank may break during lifting of a load, posing a risk of injuries. The product does not comply with the requirements of the Machinery Directive nor with the European standard EN 1494.
The product has an excessive concentration of nicotine (30.4 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product packaging does not provide any indication that the product contains nicotine. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
There is no valid technical documentation for the product and no evidence of production control. There is a lack of labelling, marking and instructions. In the absence of evidence to demonstrate the conformity of the product, along with the supplied charger and plug, it may be possible for the product to overheat and catch fire. The product does not comply with the requirements of the Machinery Directive.
The electric motorbike and its components have not been assessed using relevant conformity assessment procedures. There is no valid technical documentation for the product and no evidence of production control. There is a lack of labelling, marking and instructions. In the absence of evidence to demonstrate the conformity of the bike, battery, and charger, it may be possible for the charger and/or battery to overheat, causing a fire. The product does not comply with the requirements of the Machinery Directive.
The battery compartment can easily be opened without use of any tools and the batteries inside are easily accessible. If a child puts them in the mouth, the batteries can overheat and release electrolyte which can be ingested by the child and cause damage to the gastrointestinal tract. Moreover, the LED light is too powerful. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 62115.
The product is supplied with a plug without a fuse. Without this protection, a fault could cause the plug to overheat or explode, creating a risk of fire. The product does not comply with the requirements of the Machinery Directive.
Due to inadequate insulation between the input and output circuits of the product, the user can receive an electric shock from easily accessible live parts. The product does not comply with the requirements of the Machinery Directive.
The product has an excessive volume of nicotine-containing liquid (2.3 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The rear seats may not have been correctly bolted to the seat frame due to missing screws. In the event of a collision, this could impair the restraint and protection of passengers, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product has an excessive concentration of dichloromethane (measured value: 19.3% by weight). Dichloromethane affects the central nervous system, can impair the neuro-development and behaviour of the unborn child and might cause cancer when inhaled. The product however does not display the required warnings and hazard labels and lacks child-resistant fastening. Therefore users are not properly informed about the dangers incurred when the product comes into contact with the skin and eyes. The product does not comply with the REACH Regulation nor with the Regulation on classification, labelling and packaging of substances and mixtures (CLP).
The product is supplied with a two-pin plug that cannot incorporate a fuse. In the event of a fault or overcurrent, there is no adequate protection, which may lead to overheating and a risk of fire. The product does not comply with the requirements of the Machinery Directive.
The toy has small parts (plastic components) that can easily detach. A small child could put them in the mouth and choke. Moreover, the product contains cords/chains that are too long. They could entangle around the neck of the child and create a risk of strangulation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Small parts (buttons) can easily detach from the locking mechanism. A small child may put them in the mouth and choke. The product does not comply with the General Product Safety Regulation.
The plug pins do not meet dimensional requirements and cannot make a secure connection to the socket. Additionally, the mains plug has an insufficient fuse, which could cause the product to overheat and catch fire. The product does not comply with the requirements of the Low Voltage Directive.
The product has small parts (eyes) that may easily detach. Small children may put them in the mouth and choke. Additionally, the fibrous stuffing material of the toy is easily accessible due to the weakness of the seams. A small child may also put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product contains an excessive concentration of lead (measured value 0;0003% by weight). Lead is harmful to human health, accumulates in the body, can cause developmental neurotoxicity and may affect breast-fed or unborn children. The product does not comply with the REACH Regulation.
The product has an excessive concentration of formaldehyde (measured value up to 35.7%). Formaldehyde is a skin sensitiser and can trigger allergic reactions and may cause cancer. Additionally, the product has an excessive concentration of benzisothiazolinone (measured value up to 38.2 mg/kg). Benzisothiazolinone causes skin irritation and may cause an allergic skin reaction. Moreover, the product has an excessive concentration of lead (measured value up to 5.6% by weight). Lead is harmful to human health, accumulates in the body, can cause developmental neurotoxicity and may affect breast-fed or unborn children. The product does not comply with the REACH Regulation nor with the Regulation on classification, labelling and packaging (CLP).
The toy's string of lights and rope are too long. They could entangle around the neck of the child and create a risk of strangulation. Moreover, the battery compartment can easily be opened without use of any tools and the batteries inside are easily accessible. If a child puts them in the mouth, the batteries can overheat and release electrolyte which can be ingested by the child and cause damage to the gastrointestinal tract. The product does not comply with the requirements of the Toy Safety Directive.
The product lacks sufficient insulation. The controller box lacks a strain relief device. Additionally, the structure of the cord extension socket allows single-pole insertion of plugs, leaving live parts easily accessible to the user, who could receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
The product's external build quality is poor, and the user may access live parts and receive an electric shock. Moreover, the product has poor quality connections to the microswitch, with crimps not capturing the entire conductor, presenting a risk of fire. The product does not comply with the requirements of the Low Voltage Directive.
The product lacks sufficient insulation. Live wires are easily accessible. Moreover, the product is not protected against moisture, despite being recommended for outdoor use. Additionally, the unit lacks a proper mechanical wire strain relief device, the structure allows single-pole insertion of plugs, and the mains plug does not meet the dimensional requirements. The user could touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
Pillows and soft toys are advised not to be placed in the sleep space for babies under the age of one year, as their presence increases the risk of overheating and airway obstruction, which have been associated with sudden infant death syndrome (SIDS). The product may lead to suffocation when used in a sleep space for babies. The product does not comply with the requirements of the Toy Safety Directive.
The mains plug does not meet dimensional requirements and may not make a secure connection with the socket, leading to fire. Moreover, the fuse lacks any granular filler and might fail, posing a risk of the product overheating or exploding. The product does not comply with the requirements of the Low Voltage Directive.
The product may resemble a toy; however, there is a risk of drowning if children play with it unsupervised. Floating seats with leg openings must be used under constant adult supervision and must not have any play elements or overwater structures. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13138.
The rate of nickel release from the buckle on the shoe is too high (measured value up to 22 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The power socket is not adequately insulated and the clearance creepage distances between the primary and secondary circuits are insufficient. The user could touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 62368-1.and EN 50075.
The product has an excessive volume of nicotine-containing liquid (45 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (45 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive concentration of lead (measured value up to 42% by weight) and bis(2 ethylhexyl) phthalate (DEHP) (measured value up to 0.38% by weight). Lead poses a risk to the environment. DEHP poses a risk to human health and the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product has an excessive volume of nicotine-containing liquid (30ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The balloons release an excessive amount of nitrosamines and nitrosatable substances (measured total value: 0.21 mg/kg and 4.69 mg/kg, respectively). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive.
The product has an excessive volume of nicotine-containing liquid (30ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product has an excessive volume of nicotine-containing liquid (declared volume: 5 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and may pose a risk to the safety of the user, particularly if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product has small parts (plastic tentacles) that may easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The solders in the product have excessive concentrations of lead and cadmium (measured values up to 37,9% and 0.175% by weight, respectively). Lead poses a risk to the environment and cadmium bio-accumulates and poses a risk to the environment. The plastic material of the cable has excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), lead and short chain chlorinated paraffins (SCCPs) (measured values: 2.47%, 3.25%, 0.25% and 2.24% by weight, respectively). These phthalates poses a risk to human health and the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the Persistent Organic Pollutants (POP) Regulation.
The product has long drawstrings with free ends at the level of the head and neck. These drawstrings can become trapped during various activities of the child, leading to strangulation and injuries. The product does not comply with the General Product Safety Regulation nor with the European standard EN 14682.
The material of the purse has an excessive concentration of Bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 7.55% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
Depending on driver usage of USB and Bluetooth connections, a communication failure or memory leak may occur. This can cause an inoperative or frozen instrument cluster to fail to display critical safety information, including vehicle speed and warning telltales. Additionally, during a cluster reset, turn signals and hazard lights willtemporarily deactivate or fail to respond. These conditions reduce the driver's awareness of vehicle status and limit the ability of surrounding road users to recognize the driver’s intent, increasing the risk of an accident. The product does not comply with the Regulation on the type-approval and market surveillance of two- or three-wheel vehicles and quadricycles.
The toy items (shaped like food) consist of small parts or contain small parts. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The product has an excessive earthing resistance. The user could receive an electric shock The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and 60335-2.
The product contains barium (measured value up to 16.9 % by weight). Barium can be easily absorbed and has toxic effects on the body impairing muscle, heart and kidney activity, leading to arrythmia, paralysis or gastrointestinal alterations. The product does not comply with the Cosmetic Products Regulation.
The toy contains small parts (suction cups) that can easily become detached. A small child could put them in the mouth and choke on them. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product contains PFAS (man-made forever chemicals) (total measured value ˃1000 µg/kg) and C9–C14-PFCA-related substances (measured value 260 µg/kg). These chemicals pose a risk to the environment and human health, as they can cause developmental and reproductive toxic effects and are carcinogenic. The product does not comply with the REACH Regulation nor with the POP Regulation.
The product's insulation is insufficient and the product could break down over time, causing accessible metal parts to become live. The user could touch those live parts and receive an electric shock. The product does not comply with the requirements of the Machinery Directive.
The respiratory masks have not undergone the required conformity tests for personal protective equipment category III. When the product is used in areas to sand, paint and polish, and for fine dust and gas protection, there is a risk of coming into contact with substances and mixtures that are hazardous to health. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standard EN 149.
The respiratory masks have not undergone the required conformity tests for personal protective equipment category III. When the product is used in areas to sand, paint and polish, and for fine dust and gas protection, there is a risk of coming into contact with substances and mixtures that are hazardous to health. The product does not comply with the Personal Protective Equipment Regulation.
Due to incorrect product design, live parts are easily accessible. The user could touch the live parts and receive an electric shock. The product does not comply with General Product Safety Regulation.
The product contains Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO) (measured value 0,77 % by weight, which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The vehicle’s engine may fail to restart after driving in electric vehicle (EV) mode due to a software problem in the inverter control module when the high-voltage (HV) battery charge decreases. This could result in a loss of motive power, increasing the risk of an accident and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The toy has a small part (left rear wheel) that can easily detach. Small children could put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European Standard EN 71-1.
The toy has small parts (suction cups) that can easily detach. Small children could put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European Standard EN 71-1.
The balloons release an excessive amount of nitrosatable substances (measured total value: 1.6 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive.
The product has long functional cords with free ends in the waist and neck area. These cords could become trapped during the child’s various activities, leading to strangulation. The toy does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 14682.
The red plastic material of the product contains an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 15.4% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
The product lacks sufficient insulation. Live wires are easily accessible. Additionally, the mains plug does not meet the dimensional requirements. The user could touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
The product has an excessive volume of nicotine-containing liquid (54 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The side blade located on the C-pillar may partially detach from the bodywork. As a result, this panel could come off while the vehicle is in motion and endanger following traffic, increasing the risk of injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
According to the list of ingredients, the product contains butylphenyl methylpropional (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The product lacks sufficient insulation. Additionally, the unit lacks a proper mechanical wire strain relief device, the structure allows single-pole insertion of plugs, and the mains plug does not meet the dimensional requirements. The user could touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
The product lacks sufficient insulation. Live wires are easily accessible. Moreover, the product is not protected against moisture, despite being recommended for outdoor use. Additionally, the unit lacks a proper mechanical wire strain relief device, the structure allows single-pole insertion of plugs, and the mains plug does not meet the dimensional requirements. The user could touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
The product is supplied with an attachable canopy. In windy conditions, the canopy could cause the product to lift from the water. The child could fall from the product and be injured by impact or by drowning in the water. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13138-3.
A faulty thermal safety valve in the hydrogen tank may cause hydrogen to leak. The leaking hydrogen may ignite and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The bolts intended for use with the retaining bracket are not correctly marked in accordance with the ISO standard. This could lead users to follow incorrect installation instructions, preventing the retaining bracket from functioning properly. As a result, the trailer could detach during use, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The coupling device was not installed at the correct height. As a result, an attached trailer could detach while driving, or components of the coupling device or drawbar could break, potentially causing loss of vehicle control or overturning and increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The solders in the product have an excessive concentration of lead and cadmium (measured values up to 82.8% and 0.17% by weight, respectively). Lead and cadmium pose a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 25.2% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The product lacks sufficient insulation. Furthermore, the mains plug does not comply with the dimensional requirements, leaving live parts easily accessible to the user, who could receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.