RecallLookupBack to the product checker
Serious riskSerious risk

EU Safety Gate · Report-2012-020

Unknown · Lighting chain "140 LED Folyamatosan világít"

The product poses a risk of electric shock because:- the wire ends soldered to terminals of the flashing switch and control unit and the LEDs are not adequately protected against pulling and twisting;- the accessible wires have only basic insulation and they come into contact with sharp edges of the flashing control unit. In case of damage, the live metal parts become accessible;- the dimensions of the plug are substantially less than the requirement. During connection the user may touch the pins of the plugs;- the decorative lighting chain is recommended for outdoor use although it is not protected against moisture. The product poses a risk of fire because the cross-section area of the wires is less than the minimum requirement thus they can overheat. The product does not comply with the Low Voltage Directive and the relevant European standard EN 60598.

Published
18 May 2012
Notifying authority
Hungary
Catalog checked
30 July 2026
What should you do?

Check the authority measure and original alert.

Open the original alert before further use and follow the measures stated there.

Official source alert
Safety Gate reference
0738/12
Model
KD-140LEDI (on the product), XN-510 (on the packaging)
Batch
5 998791 195102
Check-digit validated barcodes
5998791195102
Category
Lighting chains
Risk type
Electric shock, Fire
Country of origin
Not published

The lighting chain includes serial-parallel connected, non-replaceable 140 LED lamps. The product can be operated with a flashing control unit. The main parts of the lighting chain: a two-pin plug ("WD QX 2.5A 250V CE"), flashing control unit with English-language marking and inscriptions, single-co