EU Safety Gate · Report-2008-51
AC adaptor for wireless handset of mobile telephone
The product poses a risk of electric shock because: - there is insufficient isolation between the parts connected to the mains and the output circuit which can be touched via the output cable, - creepage distances in the mains transformer (QYD 080310T1) between the primary and the secondary windings are less than 4 mm / 5 mm; measure a minimum of 0.2 mm between the primary winding and the output of the secondary winding, - there are no insulation tubes on the output wires, - the mains transformer does not pass the electric strength test of 3000 V AC for 1min between the primary winding and the secondary winding, - flash-over occurs at 1250 V AC. The product does not comply with the Low Voltage Directive and the relevant European standard EN 60950.
- Published
- 26 December 2008
- Notifying authority
- Finland
- Catalog checked
- 30 July 2026
Check the authority measure and original alert.
Type of economic operator to whom the measure(s) were ordered: Other. Category of measure(s): Recall from consumers ordered by the authorities.. Date of entry into force: Unknown
Official source alertProduct identification
- Safety Gate reference
- 1499/08
- Model
- appliancesProduct: AC adaptor for wireless handset of mobile telephoneBrand: Profset Pro10 (on the packaging)Type: HCR-EUR-D05-001 EAN: 6 430029 640101
- Check-digit validated barcodes
- 6430029640101
Classification
- Category
- Electrical appliances and equipment
- Risk type
- Electric shock
- Country of origin
- People's Republic of China
Product description
Plug-in type AC adaptor for wireless handset of mobile telephone. Handset operates with Bluetooth mobile phones with USB connector.