Acer · Electric scooter
It cannot be ruled out that the batteries used could overheat and therefore be a fire risk. The product does not comply with the requirements of the Machinery Directive.
RecallLookupउत्पाद जांचकर्ता पर वापस जाएँEU Safety Gate · 2026-01-01 →
सत्यापित ऐतिहासिक ईयू सुरक्षा गेट अलर्ट ब्राउज़ करें। प्रत्येक प्रविष्टि अपने पहचाने गए आधिकारिक स्रोत से जुड़ती है।
It cannot be ruled out that the batteries used could overheat and therefore be a fire risk. The product does not comply with the requirements of the Machinery Directive.
The plugs of the devices can be partially connected, leaving the metal parts of the active pins accessible. Moreover, the product has inadequate insulation. The user could touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60884.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The product contains perfluorocarboxylic acid related compounds (PFCAs) (measured value: 1094.6 mg/kg). These substances bio-accumulate in the wildlife, posing a risk to the environment. Moreover, the product has an excessive quantity of perfluorooctanoic-acid-related compounds (PFOAs) (measured value: 548.2 mg/kg). PFOAs pose a risk to the environment. The product does not comply with the Persistent Organic Pollutants (POP) Regulation.
The product contains perfluorocarboxylic acid related compounds (PFCAs) and an excessive quantity of perfluorooctanoic-acid-related compounds (PFOAs) (measured values: 1094.7 mg/kg and 548.2 mg/kg, respectively). PFCAs bio-accumulate in the wildlife, posing a risk to the environment, while PFOAs pose a risk to the environment. The product does not comply with the Persistent Organic Pollutants (POP) Regulation.
The plug does not meet the dimensional requirements. Moreover the plug is not manufactured with a conforming fuse. As a result, the plug may overheat and/or explode. There is a risk of fire. The product does not comply with the requirements of the Low Voltage Directive.
Incorrect webbing routing through the front/sternal D-ring and/or leg buckles can cause key safety components of the harness to break or disconnect, leading to injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation.
The product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 3.37% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The leather in the product contains chromium VI (measured value up to 14.1 mg/kg). Chromium (VI) is sensitising, can trigger allergic reactions and can cause cancer. The product does not comply with the REACH Regulation.
The plug face of the product does not meet the dimensional requirements and does not have a fuse. If there is a fault with the product or a surge in current, the product could overheat and catch fire. The product does not comply with the requirements of the Low Voltage Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The article has too many duds with and without fuse, users can ignite them causing injuries and/or burns. The fireworks may burst or eject burning material outside the designated safety distance of 8 m or below a height of 3 m, causing injuries and/or burns and/or a fire to the user or bystanders. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The fireworks may burst or release burning material over an extended period of time after functioning. Moreover, the user may decide to reignite parts of the product, which poses a risk of burns and/or injuries and/or a fire. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
The article has too many duds with and without fuse, users can ignite them causing injuries and/or burns. Additionally, the fireworks may burst or eject burning material outside the designated safety distance of 8 m or below a height of 3 m, causing injuries and/or burns and/or a fire to the user or bystanders. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
The article has too many duds with and without fuse, users can ignite them causing injuries and/or burns. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
the fireworks may burst or release burning material over an extended period of time after functioning. Moreover, the user may decide to reignite parts of the product, which poses a risk of burns and/or injuries. Furthermore, the fireworks may burst or eject burning material below a height of 3 m, causing injuries and/or burns and/or a fire to the user or bystanders. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
The article has too many duds with and without fuse, users can ignite them causing injuries and/or burns. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
The fireworks may burst or eject burning material outside the designated safety distance of 8 m or below a height of 3 m, causing injuries and/or burns and/or a fire to the user or bystanders. Additionally, the fireworks may burst or release burning material over an extended period of time after functioning. Moreover, the user may decide to reignite parts of the product, which poses a risk of burns and/or injuries. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947
The article has too many duds with and without fuse, users can ignite them causing injuries and/or burns. Additionally, the fireworks may burst or release burning material over an extended period of time after functioning. Moreover, the user may decide to reignite parts of the product, which poses a risk of burns and/or injuries. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
The fireworks may burst or release burning material over an extended period of time after functioning. Moreover, the user may decide to reignite parts of the product, which poses a risk of burns and/or injuries. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 7.2% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
In the event of a fire, ignition may occur more quickly than intended. This increases the risk that it could help a fire spread. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13501-1.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
Cracking or fracturing in the area of the exhalation valve may compromise the structural integrity and sealing performance of the respirator, thereby reducing its effectiveness. As a result, the wearer may be exposed to hazardous airborne particles, fumes, or other contaminants due to inadequate respiratory protection, which may lead to adverse effects on respiratory health. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with European standard EN 149.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The total filtration capacity of the mask is insufficient (measured values: 33.4%). Consequently, the product does not fulfil the health and safety requirements, thus it may not properly protect the user. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standard EN 149.
According to the list of ingredients, the product has an excessive concentration of ethylhexyl methoxycinnamate, butyl methoxydibenzoylmethane, phenoxyethanol, methylparaben and isopropylparaben. Ethylhexyl methoxycinnamate could be an endocrine disruptor and might cause skin irritation. Butyl methoxydibenzoylmethane might cause allergic reaction and skin irritation. Phenoxyethanol is haematotoxic, a mild irritant and may damage blood and liver. Methylparaben could cause skin irritation. Isopropylparaben might be toxic for reproduction and development, and might specifically target the male reproductive system. Moreover, the product contains fragrance allergens, which are not indicated in the list of ingredients. The product does not comply with the Cosmetic Products Regulation.
The bolts or rivets attaching the chains to the flail-cutter could break. The chains might consequently detach during use and hit the user causing injuries. The product does not comply with the requirements of the Machinery Directive nor with the Commission Decision 2012/32/EU prohibiting the placing on the market of flail-type cutting attachments for portable hand-held brush cutters.
The toy contains small magnets with a high magnetic flux. A small child may put it in the mouth and choke. Moreover, if a child swallows the small magnets, they could attract one another causing intestinal blockage or perforation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (individual rotary knobs, lock) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 71-1.
The toy could rupture and the filling of the inside could come out. The sand inside contains asbestos. Asbestos could cause cancer. The product does not comply with the requirements of the Toy Safety Directive.
The toy could rupture and the filling of the inside could come out. The sand inside contains asbestos. Asbestos could cause cancer. The product does not comply with the requirements of the Toy Safety Directive.
The mechanical strength of the power supply housing is inadequate. Moreover, the product is not protected against moisture. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 606598-1 and EN 60598-2.
The bolts or rivets attaching the chains to the flail-cutter could break. The chains might consequently detach during use and hit the user causing injuries. The product does not comply with the requirements of the Machinery Directive nor with the Commission Decision 2012/32/EU prohibiting the placing on the market of flail-type cutting attachments for portable hand-held brush cutters.
During normal use and following the filling instructions the product may overflow, leading to burns to the user. The product does not comply with the requirements of the Low Voltage Directive.
The screws that anchor the safety belts or the locking brackets of the rear bench seat backrest may not have been tightened in accordance with the specifications. In the event of a crash, vehicle occupants may therefore not be protected. There is a risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A combination of high ambient temperatures, high current loading and excessive lateral tension may cause the wiring between the alternator and the harness connector to form a bridge. If the connector’s blades form a bridge, a thermal threshold can be reached that exceeds the connector’s capacity and causes the connector to become deformed. This can result in a short circuit, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of two- or three-wheel vehicles and quadricycles.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The plug fuse has insufficient granular filler, and the plug face does not meet the dimensional requirements. As a result, the plug may overheat and/or explode. There is a risk of fire. The product does not comply with the requirements of the Low Voltage Directive.
The product has a high leakage current and moisture might be present in its heating resistance element. If the casing of a faulty product is touched, it can result in an electric shock to the user. The product does not comply with the requirements of the Low Voltage Directive.
The plug for the product is too small and the live and neutral pins are too close to the periphery of the plug. If there is a surge in the current or a fault with the product, the plug may overheat and ignite, causing a fire. The product does not comply with the requirements of the Low Voltage Directive.
The toy has small parts (jacket buttons) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product is not sufficiently sensitive with respect to detection of carbon monoxide (CO) and poses a risk of CO poisoning in that a person may inadvertently be exposed to CO trusting that the product functions correctly. This may lead to asphyxiation. The product does not comply with the General Product Safety Regulation nor with the European standard EN 50291-1.
The plastic material of the toy has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 9.0%). This phthalate may harm the health by causing possible damage to the reproductive system. Moreover, the product has small parts (metal keyring) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation and the European standard EN 71-1.
The rate of nickel release is too high (measured value: 0.96 μg/cm²/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The toy has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and diisobutyl phthalate (DIBP) (measured values up to 2.5%, 5.2% and 8% by weight, respectively). These phthalates may harm the health of children, causing possibly damage to the reproductive system. The product does not comply with the REACH Regulation.
The toy has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 14.5% by weight). This phthalate may harm the health of children, causing possibly damage to the reproductive system. The product does not comply with the REACH Regulation.
A leaking connection may occur between the gas cartouche and the device. The gas may leak, ignite and explode, causing fire and burns. The product does not comply with the Regulation on appliances burning gaseous fuels (GAR).
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA can damage the reproductive system, harm the health of an unborn child and cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA can damage the reproductive system, harm the health of an unborn child and cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The product has an excessive volume of nicotine-containing liquid (30 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The product expands in size when in contact with water. If a child puts the product in the mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. The product does not comply with the requirements of the Toy Safety Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The product has inadequate insulation and there is insufficient protection against water. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The cross-section of the wires is too small. Furthermore, the product has inadequate insulation. This could lead to a risk of electric shock to the user or the product to accumulate too much heat energy and catch fire. The product does not comply with the requirements of the Low Voltage Directive.
The equipment is used together with a free‑fall auto‑belay device, which can cause the equipment to be propelled toward the user’s face, resulting in injury. The product does not comply with the Personal Protective Equipment Regulation.
The crampons can come off or break, causing injuries to the user. The product does not comply with the Personal Protective Equipment (PPE) Regulation.
The child’s feet can get trapped between the wheel and the bicycle frame, causing injuries to the child and user Furthermore, the plastic packaging of the seat is too thin. The bag can cover a child’s head, causing suffocation. In addition, the mounting screws of the bicycle seat have protruding parts that can cause cuts to the child. The product does not comply with the General Product Safety;Regulation nor with the European standard EN 14344.
The battery compartment can easily be opened without use of any tools and the button batteries inside are easily accessible. A child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the requirements of the Toy Safety Directive or with the European standard EN 62115.
The fuel hose connected to the fuel tank unexpectedly comes off during riding, resulting in fuel leakage. Leaked fuel may adhere to the rear wheel, increasing the risk of an accident and fire. The product does not comply with the Regulation on the approval and market surveillance of two- or three-wheel vehicles and quadricycles..
The insulation of the product as well as the creepage distances between the primary and secondary circuits are not sufficient. The user can therefore touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335
The migration of boron from the toy slime is too high (measured value up to 1463 mg/kg). Ingestion or contact with an excessive quantity of boron may harm the health of children by damaging their reproductive system. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-3.
The synthetic leather parts of the handbags contain excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 2.9% and 0.7% by weight, respectively). These phthalates may be harmful to health by causing potential damage to the reproductive system. The product does not comply with the REACH Regulation.
The battery monitoring system lacks a cell temperature monitoring device. The product can overheat, catch fire and cause burns. The product does not comply with the General Product Safety Regulation nor with the European standard EN 62133-2.
Due to insufficient insulation and electric strength, in combination with the absence of the earth connection, the metal lamp housing may become live. Moreover, due to the absence of a cord anchorage, the wires may become subject to mechanical tension. The wires may become loose and can come into contact with among others the metal parts of the lamp, causing the metal parts to become live. The user could therefore touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Radio Equipment Directive nor with the European standards EN 60598-1 and EN 60598-2.
Due to insufficient insulation and electric strength the metal parts of the product (RJ45 port) and connected cables and devices may become live. The user could touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Radio Equipment Directive nor with the European standard EN 62368-1.
The product contains a mixture of the preservatives methylchloroisothiazolinone (MCI) and methylisothiazolinone (MI), which are prohibited in leave-on cosmetics. MCI and MI cause severe skin burns and eye damage and may cause an allergic skin reaction. The product does not comply with the Cosmetic Products Regulation.
The product does not provide adequate fastening support. Therefore, the baby may slip out, fall and suffer serious injuries. The product does not comply with the General Product Safety Regulation nor with the European standard EN 16512.
The product contains perfluorocarboxylic acid related compounds (PFCAs) and an excessive quantity of perfluorooctanoic-acid-related compounds (PFOAs) (measured values: 1094.6 mg/kg and 548.2 mg/kg, respectively). PFCAs and PFOAs bio-accumulate in wildlife, posing a risk to the environment. The product does not comply with the Persistent Organic Pollutants (POPs) Regulation.
The product contains perfluorocarboxylic acid related compounds (PFCAs) (measured value: 1094.6 mg/kg). These substances bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Moreover, the product has an excessive quantity of perfluorooctanoic-acid-related compounds (PFOAs) (measured value: 548.2 mg/kg). PFOAs are carcinogenic and pose a risk to the environment. The product does not comply with the REACH Regulation nor with the Persistent Organic Pollutants (POP) Regulation.
The product has small parts (the fox's feet) that can easily detach. A small child may put them in the mouth and choke. This product does not comply with the requirements of the Toy Safety Directive.
The attachment systems of the carrier have an excessive slippage. As a result, the baby may slip out, fall and suffer serious injuries. The product does not comply with the General Product Safety Regulation nor with the European standard EN 16512.
The rate of nickel release is too high (measured value up to 24.63 µg/cm2/week). Additionally, the product has an excessive concentration of cadmium and lead (measured values up to 0.017% and 2.3% by weight, respectively). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. Lead is harmful to human health, accumulates in the body and may affect breast-fed or unborn children. The product does not comply with the REACH Regulation.
The product has an insufficient granular filler of the fuse. Consequently, if a fault occurs during use, the fuse may fail to prevent fire and explosion. The product does not comply with the requirements of the Low Voltage Directive.
The plug has no fuse, and the plug face does not meet the dimensional requirements. A correctly rated fuse is required to ensure the safe operation of the plug under fault conditions, and its absence could lead to the plug overheating and/or exploding, leading to fire. Moreover, the user could touch accessible live parts and receive an electric shock. The product does not comply with the General Product Safety Regulation.
The product contains formaldehyde (measured value: 0.1%). Formaldehyde is a skin sensitiser and can trigger allergic reactions and may cause cancer. The product does not comply with Cosmetic Products Regulation.
The product expands more than 50% in size when in contact with water. If a child puts the product in their mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. Moreover, the product can generate small parts that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The fastenings may break and rip the fabric of the attachment system in several places. The baby may slip out, fall and suffer serious injuries. This product does not comply with the General Product Safety Regulation nor with the European standard EN 16512.
The solders in the product have an excessive concentration of lead and cadmium (measured values up to 83% and 0.062% by weight, respectively). Lead and cadmium pose a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The product contains water beads. If these products are swallowed, theycan block a young child’s airway leading to choking. This product does not comply with the requirements of the Toy Safety Directive.
The plug does not meet the dimensional requirements. Additionally, it is not possible to determine based on available documentation that there are sufficient battery protective systems in place to prevent thermal runaway from occurring. If the product is charged and left unattended, a fault may occur potentially leading to the battery and/or charger exploding and a fire starting. The product does not comply with the requirements of the Machinery Directive.
The toy's rattles and drum can easily break, resulting in small parts (plastic balls). A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The suction cups can be easily removed. If a child puts a suction cup in their mouth, it might obstruct the respiratory tract and cause choking. The product does not comply with the requirements of the Toy Safety Directive nor the European standard EN 71-1.
The product has a plug that is not earthed. Consequently, the user could touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The toy contains small parts (beaded necklace and left leg) that can easily detach. A small child may put them in the mouth and choke. Moreover, the crown's points may cause injuries to the child. Finally, the beaded necklace is too long. It can become wrapped around the neck of a child, leading to strangulation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.