RecallLookupउत्पाद जांचकर्ता पर वापस जाएँEU Safety Gate · 2026-01-01 →
सत्यापित ऐतिहासिक ईयू सुरक्षा गेट अलर्ट ब्राउज़ करें। प्रत्येक प्रविष्टि अपने पहचाने गए आधिकारिक स्रोत से जुड़ती है।
The product's plastic casing is not sufficiently resistant to high temperatures and may deform, leaving live parts accessible. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62368-1.
The product has small parts (bells, the key rings with snap hooks, the fish, the ducks and the strawberries) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The cross-sectional area of the electrical conductors is insufficient. Consequently, the wires of the product could overheat and catch fire, The user could also have access to live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
The product has small parts (wheels of the car) that can easily detach or break. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The article has too many duds with and without fuse, users can ignite them causing injuries and/or burns. Additionally, the fireworks may burst or release burning material over an extended period of time after functioning. Moreover, the user may decide to reignite parts of the product, which poses a risk of burns and/or injuries. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947
The mains plug does not meet dimensional requirements and the length of the live and neutral pins is below the permitted minimum level. The plug may not make a secure connection to the socket, leading to a risk of fire. The product does not comply with the requirements of the Low Voltage Directive.
The toy has small parts (beads and the heart-shaped pendants) that can easily detach. Small children may put it in their mouths and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (key rings with carabiner and fob) that can easily detach. A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The plastic material of the product has an excessive concentration of dibutyl phthalate (DBP) (measured value up to 36.1% by weight). This phthalate may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the REACH Regulation.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values up to 12.4% and 0.71% by weight, respectively). These phthalates may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the REACH Regulation.
The migration of chromium VI from the textile labels is too high (measured value up to 0.32 mg/kg). Chromium (VI) is sensitising, can trigger allergic reactions and can cause cancer. Moreover, the fibrous stuffing material of the costume is easily accessible. A small child could put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the relevant European standard EN 71-1 and EN 71-3.
The solders in the product have an excessive concentration of lead (measured value up to 2.4 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 18 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The product has an excessive concentration of nicotine (up to 2.3 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
Due to incorrect mains electrical coupling, the product poses a risk of electric shock to the user. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60335-2.
Due to the inadequate construction of the bed, the slats may crack and fall out and the support of the supporting base and the side of the bed may break. Consequently, the user may suffer injuries or cuts. The product does not comply with the General Product Safety Regulation nor with the European standard EN 1725.
The laser beam is too powerful and not properly labelled. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 50689.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The toy has small removable parts (all foam sections except the central circle). A small child may put them in the mouth and choke. Moreover, the toy has an excessive concentration of chloromethylisothiazolinone (CMIT) and methylisothiazolinone (MIT) (measured values up to 4.5 mg/kg and 5.2 mg/kg respectively). These chemicals are allergenic and can cause severe skin burns and eye damage. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product contains perfluorocarboxylic acid related compounds (PFCAs) (total measured value up to 0.31 mg/kg). These substances bio-accumulate in wildlife and humans, posing a risk to human health and the environment. The product does not comply with the REACH Regulation.
The plastic shield of the soother can easily detach. A small child could put it in the mouth and choke. The product does not comply with the General Product Safety Regulation nor with the European standard EN 1400.
The suction cup of the projectiles can easily detach. A child could put it in the mouth and choke. Shooting the projectile without the suction cup can cause injuries to eyes. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
When fitted with the needle jet (pencil jet) nozzle, the distance between the trigger and the nozzle is too short. This means that, during use, the hand will be very close to the high‑pressure jet, which may lead to accidental contact with the jet stream, resulting in tissue damage and injuries. The product does not comply with the requirements of the Machinery Directive.
The product has small parts (pieces of red plastic from the hinge) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product is not sufficiently stable. A crank arm may break and the cyclist may fall as a result and be injured. The product does not comply with the General Product Safety Regulation.
The product contains excessive amounts of bis(2-ethylhexyl) phthalate (DEHP) and diisobutyl phthalate (DIBP) (measured values up to 6.58% and 2.22% by weight, respectively). These phthalates may pose a risk to human health and the environment. In addition, the product contains excessive amounts of short-chain chlorinated paraffins (SCCPs). SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Moreover, the product has an excessive concentration of lead (measured value: 1.28% by weight). Lead is harmful to human health, accumulates in the body and may affect breast-fed or unborn children. Additionally, the product contains nonylphenol ethoxylates (NPEs) (measured value: 266 mg/kg by weight). NPEs are endocrine-disrupting chemicals that break down into nonylphenol, which can cause serious health effects, including reproductive harm, developmental abnormalities and potential cancer risks. The product does not comply with the REACH Regulation nor with the POP Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The product has an insufficient granular filler of the fuse. Consequently, if a fault occurs during use, the fuse may fail to prevent fire and explosion. Additionally, the mains plug does not meet the dimensional requirements. If there is a fault with the product, it could overheat and catch fire. The product does not comply with the requirements of the Low Voltage Directive.
Inadequate protection allows access to live parts. The user could therefore touch the accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The product has inadequate insulation and there is insufficient protection against water. Additionally, the cross-sectional area of the electrical conductors is insufficient. Due to insufficient creepage distances, there is a risk of electrical breakdown between conductive parts. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The toy has small parts (the suction cup of the projectiles). Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The solders in the product have an excessive concentration of lead, while the plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured values up to 62% and 2.9% by weight, respectively). Lead poses a risk to the environment. DEHP pose a risk to human health and the environment The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive).
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The impact absorption capacity of the helmet is insufficient. In the event of an impact, users may suffer head injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation.
The impact absorption capacity of the helmet is insufficient. In the event of an impact, users may suffer head injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation.
According to the list of ingredients the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The plastic material of the doll has an excessive amount of dibutyl phthalate (DPB), benzyl butyl phthalate (BBP), bis(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-‘isononyl’ phthalate (DINP) /di-‘isodecyl’ phthalate (DIDP) phthalate and diisobutyl phthalate (DIBP) (measured values: 0.07%, 0.01%, 17%, 0.01%, 0.16% and 0.01% by weight, respectively). These phthalates may harm the health of children by causing possible damage to their reproductive system. The product does not comply with the requirements of the Toy Safety Directive.
According to the list of ingredients the product contains Benzophenone, which is prohibited in cosmetic products. Benzophenone may cause cancer, damage to organs through prolonged or repeated exposure. The product does not comply with the Cosmetic Products Regulation.
The creepage distances and clearances between live parts and accessible parts of the insulation of the terminal block are too small, live parts may be accessible. In case the product is connected to external wiring that is too thin, the user can touch, the front side of the screw terminal and receive an electric shock. The manufacturer's instructions suggest that the product can be installed with two wires under a screw terminal. This may cause sparking and lead to a fire. The product does not comply with the requirements of the Radio Equipment Directive nor with the European standards EN 60669-2-1 and EN 60669-1.
Accessible metal parts of the lamp may become live in case of insulation damage. The user may touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598-1.
The product has small parts (beads, teething tips) that may easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The product has an excessive concentration of diethylene glycol (DEG). Diethylene glycol can be fatal as it seriously damages the kidneys and the nervous system when ingested or when it comes into contact with the skin. The product does not comply with the REACH Regulation.
The product is not adequately earthed. As a result, accessible metal parts of the lamp which may become live in case of insulation damage are not permanently and reliably connected to an earthing terminal or earthing contact. The user may touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor the European standard EN 60598-1.
The product is not adequately earthed. As a result, accessible metal parts of the lamp which may become live in case of insulation damage are not permanently and reliably connected to an earthing terminal or earthing contact. The user may touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598-1.
Due to a structural failure of the lid fastening, the lid can suddenly detach from the flask while pouring. This can cause hot liquid to suddenly and uncontrollably pour out over the user's body, causing burns. The product does not comply with the General Product Safety Regulation.
The upper material of the wallet contains an excessive concentration of phthalates: bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DPB), diisobutyl phthalate (DIBP) (value measured: 12.2 %, 0.48 % and 0.03 % respectively). These phthalates may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
A transmission fault may cause the vehicle to accidentally go into a false neutral position and move forward unexpectedly. In some cases, the sensor may show the vehicle is in “neutral” even though a gear is engaged. This means the vehicle could start moving when shifted into Drive (D) or Reverse (R), even without pressing the accelerator. This could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The toy set has small parts (the plastic tips of the cord) that can easily detach. A small child could put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The seatbelt pre-tensioner of the front seats does not comply with the technical specifications. Although the seatbelt tightens in a crash that triggers its deployment, it cannot reliably maintain this tightness, thus reducing its protective effect and increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product has an excessive concentration of kojic acid (measured value: 2.03%). Kojic acid can affect the balance of the thyroid system and also induce skin sensitisation, when used at high concentrations on hand and face, or if used on large areas of skin. The product does not comply with the Cosmetic Products Regulation.
The plastic case of the product is not self-extinguishing and a short circuit can lead to burns and fire. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62368-1.
The plastic material of the product is not fire-resistant, which can lead to a fire. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-2-29.
The toy has protruding parts. A small child could put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (pieces of plastic from the lid of the salt shaker, the lid of the pepper pot and a slice of pizza) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The cable is not properly anchored and has inadequate insulation. Moreover, the dimensions of the connection plug and socket are inadequate. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The product has an excessive concentration of lead (measured value: 2.4 mg/kg). Lead is harmful to human health, accumulates in the body, can cause developmental neurotoxicity (only if exposure to children expected) and may affect breast-fed or unborn children. The product also contains benzyl alcohol, but the presence is not indicated in the list of ingredients. Consumers are not aware of their presence, and may suffer allergic reactions or skin sensitisation. Furthermore, the product contains methylisothiazolinone (MI), which is prohibited in leave-on cosmetic products. The product has an excessive concentration of copper (measured value up to 250 mg/kg). Copper can cause liver and kidney damage and might affect fertility. The product has an excessive concentration of diethylene glycol (DEG) (measured value: 0.04%). Diethylene glycol can be lethal as it acutely harms kidneys and the nervous system when swallowed or in contact with the skin. The product does not comply with the REACH Regulation nor with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
The product has an excessive concentration of lead (measured value: 6.1 mg/kg). Lead is harmful to human health, accumulates in the body, can cause developmental neurotoxicity (only if exposure to children expected) and may affect breast-fed or unborn children. The product contains benzyl alcohol, but the presence is not indicated in the list of ingredients. Consumers are not aware of their presence, and may suffer allergic reactions or skin sensitisation. The product contains methylisothiazolinone (MI), which is prohibited in leave-on products. MI causes severe skin burns and eye damage (if in contact with the eyes), and may cause an allergic skin reaction. The product has an excessive concentration of benzisothiazolinone (measured value: 0.01 % by weight). Benzisothiazolinone causes skin irritation and may cause an allergic skin reaction. The product has an excessive concentration of diethylene glycol (DEG). Diethylene glycol can be lethal as it acutely harms kidneys and the nervous system when swallowed or in contact with the skin. The product does not comply with the REACH Regulation nor with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
The product has an excessive concentration of arsenic (measured value: 2.43 mg/kg). Arsenic may cause cancer, may damage fertility or the unborn child, causes damage to organs through prolonged or repeated exposure. Moreover, the product contains benzyl alcohol, but the presence is not indicated in the list of ingredients. Consumers are not aware of their presence, and may suffer allergic reactions or skin sensitisation. The product does not comply with the REACH Regulation.
The product has an excessive concentration of arsenic (measured value : 1.27 mg/kg) and copper (measured value : 250 mg/kg). Arsenic may cause cancer, may damage fertility or the unborn child, causes damage to organs through prolonged or repeated exposure. Copper can cause liver and kidney damage and might affect fertility. Moreover, the product contains benzyl alcohol in a quantity exceeding the maximum permitted (> 0.001%), but the presence is not indicated in the list of ingredients. Consumers are not aware of their presence, and may suffer allergic reactions or skin sensitisation. The product does not comply with the REACH Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The battery management system lacks a cell temperature monitoring device. The product can overheat and cause burns. The product does not comply with the General Product Safety Regulation nor with the European standard EN 62368-1.
The toy has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 21.43% and 0.64% by weight, respectively). These phthalates may harm the health of children, causing possibly damage to the reproductive system. The product does not comply with the REACH Regulation.
Parts of the product may detach, leading to the internal shaft becoming exposed, which could cause injury to the user. The product does not comply with the requirements of the Radio Equipment Directive.
The product contains asbestos fibres (measured value 0.42% by weight). Asbestos could cause cancer. The product does not comply with the REACH Regulation nor with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
A bolt with a reduced shank diameter could cause the torque pin to slide out of the rear lower suspension arm. This may lead to overload and failure of the lower suspension arm, which can cause damage to other suspension components and the rear brakes, which could cause an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The controller casing is too thin and can easily break and the cable of the lighting chain can easily detach or break. Due to this, live parts are made accessible and the user can receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598-2-20.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The D-ring handle that is used to unlock the weight pocket from the Buoyancy Compensator Device can detach during use. If this happens, the user will not be able to remove the weight pocket in an emergency to rise to the surface safely. There is therefore a risk of drowning. The product does not comply with the General Product Safety Regulation.
The battery management system lacks a cell temperature monitoring device. The product can overheat and cause burns or a fire. The product does not comply with the General Product Safety Regulation nor with the European standard EN 62133-2.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The battery management system lacks a cell temperature monitoring device. The product can overheat and cause a fire and burns. The product does not comply with the General Product Safety Regulation nor with the European standard EN 62133-2.
The suction cups of the arrows can detach and consequently the arrow can be launched without without the suction cup. The arrow can hit a child's eye, causing injuries and damage to sight. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (the blue part of the upper part of the horn) that can easily detach. A small child could put it in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (zip slider) that can easily detach. A small child could put them in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1
The toy has small parts (whistles) that can easily detach. A small child could put them in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The Safety Data Sheet classifies this product as a flammable liquid that may cause eye irritation and organ toxicity. However, the product labelling omits the required hazard information, leaving users unaware of the dangers of the product. The product does not comply with the Classification, Labelling and Packaging (CLP) Regulation.
The product contains p-phenylenediamine (PPD) (measured value 9.68 g/100g by weight) without coupler substances. Uncoupled PPD is an extreme skin sensitiser and can cause allergic contact dermatitis. The product does not comply with the Cosmetic Products Regulation.
There is insufficient creepage and clearance distance in the product's transformer and the product has insufficient insulation. The user can therefore access live parts and receive an electric shock. The product does not comply with the requirements of the Machinery Directive.
The cable cross section, the mechanical strength and dielectric strength are insufficient. The user could touch accessible live parts, which may cause an electric shock. Additionally, the product may overheat and cause a fire. The product does not comply with the requirements of the Low Voltage Directive
The plastic bag packaging is too thin. If a child places the plastic bag over its head, it could suffocate. The product does not comply with the requirements of the Toy Safety Directive.
The toy has a small part (the end cap of the metal shaft with the coloured wooden rings) that can easily detach. Small children may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard 71-1.
The toy set has small magnets with a high magnetic flux (measured value up to 112 Kg²mm). If a child swallows the magnets, they could attract one another causing intestinal blockage or perforation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (the suction cups) that can easily detach. A small child could put it in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive
The toy has protruding parts. A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Due to inadequate grounding, insulation, cross section area of the power cord and inadequate clearance and creepage distances, the product poses a risk of electric shock to the user. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-2-41 and EN 60335-1.