RecallLookupالعودة إلى مدقق المنتجEU Safety Gate · 2026-01-01 →
تصفح تنبيهات بوابة الأمان الأوروبية التاريخية التي تم التحقق منها. يرتبط كل إدخال بمصدره الرسمي المحدد.
The plug fuse has insufficient granular filler and therefore does not meet requirements. If a fault occurs, without granular filler the plug may overheat and ignite, causing a fire. The product also has accessible metal parts which can become live during use. Consequently, the user can receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Furthermore, due to the dimensionally deficient faceplate layout, users can touch live metallic pins during insertion. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product contains small parts (the suction cups) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The product lacks adequate insulation between the primary and secondary circuits. The USB port can become live. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The rivets attaching the knives to the flail-cutter’s main body could break. The knives might consequently detach during use and hit the user, causing injuries. The product does not comply with the requirements of the Machinery Directive nor with the Commission Decision 2012/32/EU prohibiting the placing on the market of flail-type cutting attachments for portable hand-held brush cutters.
The product's insulation is inadequate. The user could touch live parts and receive an electric shock. Moreover, the casing can easily overheat and cause a fire. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62368-1.
A manufacturing defect may cause hot air to leak from the air intake duct between the turbocharger and the air exchanger. The escaping hot air may overheat nearby plastic and rubber components, potentially causing a fire in the engine compartment. This can also lead to a loss of engine power which could increase the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The screw connection of the upper joint bearing on the rear shock absorber’s piston rod may become detached. This could cause the spring strut to lose its upper support, resulting in failure of the suspension and damping on the affected rear wheel. The wheel may then strike the bodywork and vehicle handling may deteriorate significantly, increasing the risk of an accident and injury. The product does not comply with the Regulation on the approval and market surveillance of two- or three-wheel vehicles and quadricycles.
The product has an excessive volume of nicotine-containing liquid (60 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (65 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks the required labelling, marking and instructions. The product may overheat and catch fire. The product does not comply with the requirements of the Machinery Directive.
The fuel tank wall near the inlet check valve is thinner than specified. In the event of a crash, the tank may not withstand the impact adequately, which could lead to fuel leakage and potentially cause a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seatbelt anchor in the second row of seats may not have been properly attached during assembly. This may impair the protective effect of the seatbelt in the event of an accident, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The front axle control arm may not be properly secured. This could lead to a loss of steering control, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The ladder does not have enough resistance to weight and can easily collapse. The user can therefore fall and suffer injuries. The product does not comply with the General Product Safety Regulation.
The earth conductor of the product is not adequately secured and can easily detach during use and the product exceeds the maximum permitted temperature rise. This could cause overheating of the product and cause a fire. The product does not comply with the requirements of the Low Voltage Directive.
The plastic bag packaging is too thin. If a child places the plastic bag over their head, they could suffocate. The product does not comply with the requirements of the Toy Safety Directive.
The toy has small parts (suction cups) that can easily detach. Small children could put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European Standard EN 71-1.
The fibrous stuffing material of the toy is easily accessible due to the weakness of the seams. A small child may put the filling material in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The battery management system lacks a cell temperature monitoring device. The product can overheat and cause burns. The product does not comply with the requirements of the General Product Safety Regulation nor with the European Standard EN 62133-2.
The product lacks adequate insulation, leaving accessible live parts of the secondary USB output and the connected device. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary circuit and the connected cable can become live. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 62368-1.
The product has a small part (light blue ring) that may easily detach. Small children may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The product has an excessive volume of nicotine-containing liquid (declared value: 4 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The toy can easily ignite if directly exposed to a flame, burning quickly and completely because it is not designed to mechanically delay the combustion process. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-2
The product has an excessive volume of nicotine-containing liquid (20 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The user of the product can have unprotected access to the laser beam during operation, which could cause damage to sightMoreover, due to the scattered radiation emitted by the product during operation, the user and other people could be injured. Additionally, users could be exposed to toxic substances (vapours) which may be generated during the processing of materials and can cause other health risks to the users. The product does not comply with the Machinery Directive.
The electronic controller of the scooter does not guarantee that the speed is permanently limited to a maximum of 25 km/h. As a result, the speed limit is likely to be exceeded. As a consequence, the user could have difficulties controlling the scooter, fall and suffer injuries. . The product does not comply with the requirements of the Machinery Directive.nor with the European standard EN 17128
The product's insulation between circuits is inadequate. Additionally, the space between the circuits and the transformer is insufficient and is not adequately insulated. The user could touch live parts and receive an electric shock. Moreover, the casing of the power supply can easily overheat and cause a fire . The product does not comply with the requirements of the Low Voltage Directive.
The product's plug has a manufacturing defect and may therefore overheat. This could lead to the plug and cable melting and/or catching fire. The product does not comply with the requirements of the Low Voltage Directive.
The solders in the product have an excessive concentration of lead. (measured value up to 39.5% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the toy have an excessive concentration of lead (measured value up to 87% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances (ROHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up 60 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The product has small parts (the small balls). Moreover, small parts (the suction cups) can easily detach. A small child may put these in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (the key ring) that can easily detach. A small child could put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The opening of the direct pedal-driven wheel is too large. A child could insert fingers or other body parts into this opening and suffer injuries. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 71-1.
The electrical connections of the kettle may overheat causing the insulating material of the elements supporting the contacts to melt, leading to their disconnection and leaving live parts accessible. The user may touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and 60335-2.
The internal elements of the product are not properly attached and may contact the metal casing. Moreover, the wires are not adequately insulated and can easily tear. Additionally, the metal casing is not sufficiently resistant and the user could access live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-1.
The laser beam of the projector is too powerful (measured value up to 2.78 mW) and the product is not properly labelled. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the General Product Safety Regulation nor with the European standards EN 60825-1 and EN 50689.
The laser beam is too powerful (measured value up to 3.23 mW) and the projector is not properly labelled. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the General Product Safety Regulation nor with the European standards EN 60825-1 and EN 50689.
The laser beam is too powerful (measured value up to 6.75 mW) and the projector is not properly labelled. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the General Product Safety Regulation nor with the European standards EN 60825-1 and EN 50689.
The laser beam is too powerful (measured value up to 2.02 mW) and the projector is not properly labelled. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the General Product Safety Regulation nor with the European standards EN 60825-1 and EN 50689.
The laser beam is too powerful (measured value up to 3.62 mW) and the projector is not properly labelled. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the General Product Safety Regulation nor with the European standards EN 60825-1 and EN 50689.
The product's arches ends are too prominent and small enough for a small child to put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The product is supplied with a plug without fuse link and the adaptor provided with is not suitable. The user could therefore receive an electric shock and the product could cause a fire when charging. The product does not comply with the requirements of the Machinery Directive.
The gate's gaps are large enough for a small child to slide through and become trapped, leading to a risk of suffocation. The product does not comply with the General Product Safety Regulation nor with the European standard EN 1930..
The rear brake caliper may become overloaded and break, which could lead to accidents and injuries. This product does not comply with the Regulation on the approval and market surveillance of two- or three-wheel vehicles and quadricycles.
Due to insufficient bonding, the panoramic roof may detach and fall onto the road. There is a risk of accident and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The connecting rods for the front upper ball joints do not have the required material hardness due to insufficient induction hardening in the manufacturing process and may break. As a result, the steering could be impaired, and fragments could fall onto the road. This increases the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product contains benzyl salicylate, but the presence is not indicated in the list of ingredients. Consumers are not aware of their presence, and may suffer allergic reactions or skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The front seat belt snap-on anchor may become misaligned or come loose. If an accident occurs, this may increase the risk of injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The diesel particulate filter (DPF) may be cracked on 2.0 l EcoBlue Diesel and 1.5 l EcoBlue vehicles. This could cause the vehicles to fail the legally required roadworthiness test, as exhaust emissions of soot may be above the authorised limit. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The rear passenger window trim is not properly secured and may detach while the vehicle is moving and fall onto the road, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product lacks adequate insulation between the primary and secondary circuits. The secondary circuit and the connected cable can become live. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary circuit and the connected cable can become live. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product contains benzyl alcohol but the presence is not indicated in the list of ingredients. Consumers are not aware of its presence and may suffer allergic reactions or skin sensitisation. Moreover, the product also contains allergenic fragrances (Linalool, Limonene, Citral, Geraniol and Farnesol), which are not mentioned in the list of ingredients. Failure to mention the presence of these allergenic substances on the labelling in leave-on products may cause dermatitis/eczema, or more serious skin reactions in already sensitized persons. The product does not comply with the Cosmetic Products Regulation.
The product lacks adequate insulation between the primary and secondary circuits. The secondary circuit and the connected cable can become live. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary circuit and the connected cable can become live. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60884-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary circuit and the connected cable can become live. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product contains p-phenylenediamine (PPD) (measured value 3.4% by weight) without coupler substances. Uncoupled PPD is an extreme skin sensitiser and can cause allergic contact dermatitis. The product does not comply with the Cosmetic Products Regulation.
The toy has small parts (suction cups) that can easily detach. Small children could put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European Standard EN 71-1.
The product has an excessive volume of nicotine-containing liquid (8 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (12 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The toy consists of small magnets with high magnetic flux (measured value up to 0.724 T²mm²). If a child swallows them, they could attract one another causing intestinal blockage or perforation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product has small parts (eyes) that may easily detach. Small children may put them in the mouth and choke. Additionally, the fibrous stuffing material of the toy is easily accessible due to the weakness of the seams. A small child may also put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product is supplied with a toothed saw blade attachment that can strike an object during operation causing the product to be forced backwards towards the user, which could lead to injuries. The product does not comply with the requirements of the Machinery Directive.
Due to its size and form, the product can reach too far into the children's mouth and pose a risk of choking and airway obstruction. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary ports can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB port can become live. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports can become live. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary circuit and the connected cable can become live. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports can become live. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
Users can plug earthed appliances into the product without establishing an earth connection, leaving accessible metal live parts. Furthermore, the design allows users to touch a live pin while inserting a plug. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB port can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The solders in the product have an excessive concentration of lead (measured value up to 59% by weight). Lead poses a risk to the environment. Additionally, the plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values up to 15% and 0.16% by weight, respectively). These phthalates may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation nor with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The product is highly alkaline (pH=12.6) and is a skin corriosiv category one and can cause serious eye damage but lacks the required warnings and hazard labels. Users are therefore not properly informed about the dangers incurred when the product comes into contact with the skin and eyes. The product does not comply with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
The product is extremely acid (pH value of 0.67) and can cause severe skin corrosion (Category 1) and eye damage. The product is incorrectly labelled and the appropriate pictograms are missing. Users are therefore not properly informed about the dangers incurred when the product comes into contact with the skin and eyes. The product does not comply with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
The product is not adequately insulated between the heating element and the metal housing. The user could access live parts and receive an electric shock. Additionally the product lacks an automatic shut-off, the product could therefore overheat and deform, causing burns to the user. The product does not comply with the requirements of the Low Voltage Directive.
Due to incorrect product design, the product can easily break, leaving live parts accessible. The user could touch the live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive not with the European standards EN 60884-1 and EN 60884-2..
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB port can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB port can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB port can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The plastic material of the doll's arm and of the packaging have an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured values up to 0.16 % and 17 % by weight, respectively). These phthalates may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 13.5% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
The toy has small parts (piece of white plastic from the tail) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 16.4% by weight). This phthalate may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the REACH Regulation.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB port can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The plastic material of the toy has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 4.1% and 9.3% by weight, respectively). These phthalates may harm the health by causing possible damage to the reproductive system. Additionally, due to the lack of required safety warning, users may aim the arrows at the eyes or face, which can lead to physical injuries. The product does not comply with the REACH Regulation nor with the requirements of the Toy Safety Directive.
The bolts or rivets attaching the chains to the flail-cutter could break. The chains might consequently detach during use and hit the user causing injuries. The product does not comply with the requirements of the Machinery Directive nor with the Commission Decision 2012/32/EU prohibiting the placing on the market of flail-type cutting attachments for portable hand-held brush cutters.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports and the connected cable can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.