RecallLookupÜrün denetleyicisine geri dönEU Safety Gate · 2026-01-01 →
Doğrulanmış geçmiş AB Güvenlik Kapısı uyarılarına göz atın. Her giriş, tanımlanmış resmi kaynağına bağlantı verir.
The laser beam is too powerful (measured value up to 3 mW). Direct viewing of the laser beam could cause damage to sight. The product does not comply with the General Product Safety Regulation nor with the European standards EN 50689 and EN 60825-1.
The laser beam is too powerful. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the General Product Safety Regulation nor with the European standards EN 50689 and EN 60825-1.
The toy contains small parts (the paws) that may easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The battery compartment can easily be opened without use of any tools, making the button batteries inside easily accessible. A child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the General Product Safety Regulation.
The product does not feature adequate safety shutters. The user could therefore touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The head of the child is not supported sufficiently by the seat in case of an impact, which can result in serious injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles nor with Regulation UN/ECE No 129.
The laser beam is too powerful (measured value up to 4.4 mW) and the projector is not properly labelled. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the General Product Safety Regulation nor with the European standards EN 60825-1 and EN 50689.
The product has small parts (the pullcords' ends) that may easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The beam intensity of the LED light in the toy is too powerful. Direct viewing of the beam could cause damage to sight. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 62115.
The product could cause its content to overflow during use, which could cause burns to the user. The product does not comply with the requirements of the Low Voltage Directive.
The toy has small parts (fish) that can easily detach. A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product contains the synthetic cannabinoid ADB-4en-PINACA, which is a highly potential psychoactive substance acting on the central nervous system and can therefore cause mental and behavioural disorders. The use of this substance is associated with the risk of serious toxic effects, including acute intoxication, impaired consciousness, mental and behavioral disorders, neurological complications and cardiovascular effects. The product does not comply with the General Product Safety Regulation.
The battery management system does not have a device that monitors cell temperature. The product could overheat, which could cause burns or lead to a fire. The product does not comply with the General Product Safety Regulation, nor with the European standard EN 62133-2.
The product expands more than 50% in size when in contact with water. If a child puts the product in their mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71.
Due to incorrect mains electrical coupling, the product poses a risk of electric shock to the user. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60335-2.
Due to incorrect mains electrical coupling, the product poses a risk of electric shock to the user. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60335-2.
Due to incorrect mains electrical coupling, the product poses a risk of electric shock to the user. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60335-2.
The toy pushchair has an inadequate locking mechanism and is not sufficiently resistant to load. As a result, it may collapse easily, posing a risk that a child in the stroller could fall to the ground and suffer injuries. Additionally, the inadequate locking mechanism could lead to entrapment, finger crushing, and cuts or abrasions resulting from the sudden collapse of the folding mechanism. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Due to inadequate moisture protection and insulation of the product, the user can receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
The product has a protruding part. Small children may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy could rupture and the filling of the inside could come out. The sand inside contains asbestos. Asbestos could cause cancer. This product does not comply with the requirements of the Toy Safety Directive.
The high voltage battery may overheat, which may lead to fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The battery management system does not have a device that monitors cell temperature. The product could overheat which could cause burns or lead to a fire. The product does not comply with the General Product Safety Regulation nor with the European standard EN 62133-2.
Due to an error in the DC voltage automatic range selector, the multimeter display shows too low a voltage. The user may assume a low voltage and touch high-voltage parts, which could lead to an electric shock. The product does not comply with the requirements of the Radio Equipment Directive.
The earthing conductor is shorter than the current-carrying conductors. This could cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and 60335-2.
The product contains the psychoactive cannabinoids cannabivarin, cannabigerol and cannabinol, as well as the semi-synthetic cannabinoid HCC and the synthetic substance MDMB-PINACA. These substances can cause mental and behavioural disorders, acute intoxication, impaired consciousness, neurological complications and cardiovascular effects The product does not comply with the requirements of the Tobacco Products Directive.
A defective module has been installed in the high-voltage battery, which may cause it to overheat and could lead to a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A defective module has been installed in the high-voltage battery, which may cause it to overheat and lead to a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The idler pulley on the front-end accessory drive (FEAD) belt may over-rotate due to high torsional stress and collide with the oil temperature and pressure sensor. This could damage the sensor and cause an oil leak, creating a slipping hazard for other road users, particularly two-wheeled vehicles. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product contains a psychoactive cannabinoid (MDMB-PINACA), which is a highly potential psychoactive substance acting on the central nervous system and can therefore cause mental and behavioural disorders. The use of this substance is associated with the risk of serious toxic effects, including acute intoxication, impaired consciousness, mental and behavioral disorders, neurological complications and cardiovascular effects. The product does not comply with the General Product Safety Regulation.
The product contains a psychoactive cannabinoid (MDMB-PINACA), which is a highly potential psychoactive substance acting on the central nervous system and can therefore cause mental and behavioural disorders. The use of this substance is associated with the risk of serious toxic effects, including acute intoxication, impaired consciousness, mental and behavioral disorders, neurological complications and cardiovascular effects. The product does not comply with the General Product Safety Regulation.
The mechanical strength of the power supply housing is inadequate. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
The toy consists of small magnets with high magnetic flux (measured value up to 289 kG²mm²). If a child swallows them, they could attract one another causing intestinal blockage or perforation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Because the top/bottom eyelets have not been properly crimped, the wire cable can become detached from the eyelets. This means that the safety belt does not restrain the passenger, who is at risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The toy contains small parts (hands, feet and carabiners) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Due to inadequate moisture protection and insulation of the product, the user can receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598-2-11.
The product is not adequately insulated between the mains voltage connection points of the power supply and the USB connection points. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
Due to a software error, the pedals may reverse direction while the user is riding the bike, which could lead to injuries. The product does not comply with the requirements of the Machinery Directive.
The product has insufficient protection against water and moisture: the mains plug is neither waterproof nor protected against dust or solid objects. Moreover, the insulation between the live parts and the accessible parts of the product is insufficient. Additionally, the creepage distances between the live parts and the accessible metal casing are insufficient. Therefore, the user may have access to live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62031.
The product does not have a protective earth conductor. Moreover, the USB charger is not adequately insulated. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60884-1, EN 60884-2-7 and EN 60335-1.
Due to a software error, the pedals may reverse direction while the user is riding the bike, which could lead to injuries. The product does not comply with the requirements of the Machinery Directive.
Due to a software error, the pedals may reverse direction while the user is riding the bike, which could lead to injuries. The product does not comply with the requirements of the Machinery Directive.
The accessible metal parts, such as the brush or some internal parts, are not sufficiently insulated and the safety distances between the live parts and the metal parts are insufficient. The supply cable may come into contact with hot metal parts and make live parts accessible to the user, causing a risk of electric shock. Additionally, some plastic parts of the appliance, such as the handle of the curling iron, may overheat during use, which may lead to fire. The product does not comply with the requirements of the Low Voltage Directive.
An incorrectly fitted retaining ring in the Power Transfer Unit may cause an unexpected loss of traction and/or failure of the parking function, increasing the risk of an accident and injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The lithium-ion battery controller (LBC) may not provide reliable diagnostic results due to parasitic effects or fluctuations in circuit resistance, which can cause the integrated circuits monitoring the battery cell voltage to incorrectly detect anomalies. As a result, the system may switch to fail-safe mode while the vehicle is being driven, limiting engine power and preventing charging. If regenerative charging occurs, the fail-safe mode may turn off the main relay, causing a loss of engine power and a loss of propulsion while the vehicle is in motion, increasing the risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The insulation between the product’s internal electrical circuits is not sufficient. Moreover, the clearance and creepage distances are not sufficient. A single layer of insulating tape is used to separate the electrical windings, whereas reinforced insulation (three layers) is required to ensure safety. The user could therefore touch accessible live parts and receive an electric shock. Additionally, due to insulation defects, sparks or short circuits may occur, which may lead to fire. The product does not comply with the requirements of the Low Voltage Directive.
The helmet fastener can easily open during a fall or accident, causing the helmet to slip off and potentially leading to head injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standard EN 1087.
The product is not adequately insulated between the mains voltage connection points of the power supply and the USB connection points. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN IEC 60335-1.
The cable is not properly anchored (missing cable strain relief) and the accessible wires have inadequate insulation. Moreover, the plug can be partially inserted leaving a live pin exposed. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
The cable is not properly anchored (missing cable strain relief) and the accessible wires have inadequate insulation. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598.
The bag of the packaging is non-permeable. its opening exceeds the permitted size and includes drawstrings. If a child plays with it and tightens the drawstrings, the material can cover the mouth and nose, causing the child to suffocate. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product does not provide adequate earthing protection. Under fault conditions, accessible parts could become live. The user could therefore touch the accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The conductors of the product lack sufficient insulation. Furthermore, the product is not protected against moisture. Consequently, live parts may become easily accessible to the user, who could receive an electric shock and a risk a of fire. The product does not comply with the requirements of the Low Voltage Directive.
The supplied plug adaptor does not meet dimensional requirements, preventing a secure connection with the socket and causing overheating over time. In addition, the supplied plug does not have capacity for a fuse, which is required for safe operation under fault conditions. Moreover, the earth pin of the adaptor is not solid. These could cause the adaptor or plug to catch fire or explode, posing a risk of fire. The product does not comply with the requirements of the Machinery Directive.
The strength and the effectiveness of the retention system of the helmet are inadequate. In the event of an impact, users may suffer head injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standard EN 1087.
The battery compartment of the product can be easily opened, leaving batteries accessible. A child may put the batteries in the mouth, which could cause damage to the gastrointestinal tract of the child if swallowed. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 62115.
The product contains a single UV-filter and does not provide the announced level of Sun Protection Factor (SPF). Consumers may therefore suffer sunburn and the chronic consequences of excessive sun exposure through the UV radiation contained in sunlight when using the product, including immunosuppression, skin ageing and skin cancer. The product does not comply with the Cosmetic Products Regulation.
The product contains an excessive amount of the allergenic fragrance limonene (measured value up to 2.06%), which can lead to skin sensitisation. Moreover, according to the list of ingredients, the product contains sodium tetraborate (borax), which is prohibited in cosmetic products. Borax may be toxic for reproduction. The product does not comply with the Cosmetic Products Regulation.
A defective valve assembly may lead to noises, a loss of power and/or propulsion failures (damage to the engine). Further damage may lead to an oil leak. This may lead to accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The impact absorption capacity of the helmet is insufficient. In the event of an impact, users may suffer head injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standard EN 1078.
The creepage and clearance distances between the primary and secondary circuits are inadequate. Furthermore, the capacitor of the product is insufficient and the conductors are not fixed properly. The user could therefore touch accessible live parts and receive an electric shock. Moreover, in the event of an electrical surge or fault, the printed circuit board may overheat and ignite, causing a fire. The product does not comply with the requirements of the Low Voltage Directive.
The ABS-ESP control unit may have been incorrectly programmed by the supplier, preventing detected failures from being communicated to the vehicle dashboard. As a result, if the braking control system fails, the driver may not receive a warning that the following functions are unavailable: emergency brake assist, anti-lock braking system (ABS), electronic stability programme (ESP), automatic emergency braking (AEB), hydraulic brake booster (HBB), and hydraulic braking compensation (HBC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The total filtration capacity of the mask is insufficient (measured as low as 92 %). Consequently, the product does not fulfil the health and safety requirements. Thus, even if combined with other recommended measures, it may not properly protect. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standard EN 149.
According to the list of ingredients, the product contains Diphenyl (2,4,6-trimethylbenzoyl)phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl (2,4,6-trimethylbenzoyl)phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product has live parts (controller without cover or power supply cord), which are easily accessible. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598-2-20.
The product expands in size when in contact with water. If a child puts the product in the mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has a protruding part. A small child could put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product is classified as this product as posing an aspiration hazard and may cause eye and skin irritation and toxicity but lacks the required labelling, a child-resistant fastening and tactile warnings. The user is therefore not adequately informed about the risks when using this product. The product does not comply with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
The battery compartment can easily be opened without use of any tools and the button batteries inside are easily accessible. A child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. Moreover, the LED light is too powerful (measured value 0.15 W).. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 62115.
The table can easily break under weight and collapse, leading to injuries for the users. The product does not comply with the General Product Safety Regulation nor with the European standards EN 581-1 and EN 581-3.
The product has a protruding part. Small children may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has protruding parts. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
A transmission leak may reduce lubrication and cause the transmission to overheat. This could lead to mechanical failure of the gearbox input shaft and, in rare adverse conditions, may result in a fire if the broken shaft comes into contact with oil-saturated acoustic insulation beneath the gearbox. The product does not comply with the Regulation on the approval and market surveillance of two- or three-wheel vehicles and quadricycles.
The switches with safety functions are designed as normally open switches. If the safety switches are dirty or their springs are not working properly, users could access the blades during usage, leading to injuries. The product does not comply with the requirements of the Machinery Directive.
The product's upper surface temperature difference is excessive, which could lead to burns or a fire. Moreover, the earthing continuity on the upper plate depends on a helical spring, rendering it inadequate, and the connection between the earth terminal or earth contact and the earthed metal parts have excessive resistance. The user can therefore touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and 60335-2.
The connector hood may become detached after frequent assembly and disassembly. It no longer provides protection against electric shocks as live parts could become accessible. The user could touch accessible live parts, which may lead to an electric shock. Moreover, the power cable may heat excessively. This may cause damage to the cable and lead to overheating and fire. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-2.
The covers enclosing live parts can be removed without a tool. Therefore, a user could access and touch live parts, creating a risk of electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The solders in the product have an excessive concentration of lead (measured value up to 40 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead and cadmium (measured values up to 62.3% and 0.187% by weight, respectively). Lead and cadmium pose a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead and cadmium (measured values up to 85% and 0.5% by weight, respectively). Lead poses a risk to the environment. Cadmium bio-accumulates and poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 73 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The battery compartment can easily be opened without use of any tools, making the button batteries inside easily accessible. A child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the requirements of the Toy Safety Directive nor with the European standards EN 71-1 and EN 62115.
Due to the inadequate welding of the joints for the ISOFIX anchor points, they can easily break in the event of an accident, causing injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
During engine operation, the fuel line may move within its retaining clip in the engine compartment. This movement could damage the fuel line and cause a fuel leak, creating a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The ball joints installed in tie rods of Unimog 405 and Unimog 437 vehicles may not have fully undergone the prescribed hardening process. This can result in increased wear and reduced fatigue strength up, with a possible fatigue fracture. In the event of such a break, steering would no longer be possible and there would be a risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The rear suspension springs may not have been manufactured with the required dimensions, which could cause the left or right rear spring to break. If this occurs, the vehicle may sag and the broken spring could fall onto the road, increasing the risk of an accident for the vehicle occupants and other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The laser beam is too powerful (measured values up to 6.9 mW) and the projector is not properly labelled. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the General Product Safety Regulation nor with the European standards EN 60825-1 and EN 50689.
The cable feed-through from the handle of the product to the upper heating plate is not sufficiently insulated. The user can therefore have access to live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The puzzle mat pieces can easily break, generating small parts. Children may put these in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product's lack of safety functions such as a chain brake, an ergonomic handle and switch function may seriously injure the user if the saw chain blocks or kicks back. The product does not comply with the requirements of the Machinery Directive nor with the European standard EN 62841-4.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 45.24 % by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
The soother holder does not have the required ventilation holes, which could lead to suffocation. Moreover, the garment fastener can easily break causing a screw to become detached. Small children may put it in the mouth and choke or be injured by its sharp points The product does not comply with the General Product Safety Regulation nor with the European standard EN 12586.
The stand may break, the bicycle may overturn and possibly injure someone. The product does not comply with the requirements of the Machinery Directive.
The battery management system lacks a cell temperature monitoring device. The product can overheat and cause burns. The product does not comply with the General Product Safety Regulation nor with the European Standard EN 62368-1.
The fibrous stuffing material of the toy is easily accessible due to the weakness of the seams. A small child may put the filling material in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The fibrous stuffing material of the toy is easily accessible due to the weakness of the seams. A small child may put the filling material in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The outer casing becomes excessively hot and no warning is provided, which can lead to burns. Moreover, the accessible metal parts (such as the heating plate) are unearthed, which can make them dangerous in the event of an electrical fault. Additionally, the power cable is unearthed and the internal earthing connections have not been connected. The user could touch accessible live parts, which may lead to an electric shock. The product does not comply with the requirements of the Low Voltage Directive.