RecallLookupالعودة إلى مدقق المنتجEU Safety Gate · 2026-01-01 →
تصفح تنبيهات بوابة الأمان الأوروبية التاريخية التي تم التحقق منها. يرتبط كل إدخال بمصدره الرسمي المحدد.
The balloons release an excessive amount of nitrosatable substances (measured total value: 2.2 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-12.
The toy has an excessive concentration of dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), bis(2-ethylhexyl) phthalate (DEHP), diisobutyl phthalate (DIBP), di-‘isononyl’ phthalate (DINP), di-‘isodecyl’ phthalate (DIDP) and di-n-octyl phthalate (DNOP) (measured values: 0.54%, 0.01%, 0.17%, 0.01%, 0.01%, 0.01% and 0.01% by weight, respectively). These phthalates may harm the health of children, causing possibly damage to the reproductive system. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation.
The toy has an excessive concentration of dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), bis(2-ethylhexyl) phthalate (DEHP) and diisobutyl phthalate (DIBP) (measured values: 0.08%, 0.01%, 0.98% and 0.01% by weight, respectively). These phthalates may harm the health of children, causing possibly damage to the reproductive system. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation.
The rate of nickel release is too high (measured value up to 0.59 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The toy has small parts (beads and small cubes) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product contains cyanoacrylates that can bond skin and eyes in seconds. The product however does not display the required warnings and hazard labels and lacks child-resistant fastening. Therefore users are not properly informed about the dangers incurred when the product comes into contact with the skin and eyes. The product does not comply with the Regulation on classification, labelling and packaging of substances and mixtures (CLP).
Manufacturing errors in the production of steering components may reduce their fatigue strength and make them susceptible to breakage. If a component breaks, the steering system may fail, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Corrosion may cause the mounting bolts and front control-arm joints to break. This could affect the vehicle’s handling and make it unpredictable, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The solders in the product have an excessive concentration of lead. (measured value: 34% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The creepage distances between the primary and secondary circuits are inadequate. The user could therefore touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
Improperly secured screws may cause the access panels to open while the vehicle is in motion. This could create a hazard for vehicle occupants and other road users, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
Due to the insufficient mechanical strength of the product, live parts are accessible, which could result in electric shock to the user. Moreover, the product has an inadequate conductor cross-section and a flawed design that allows the plug to be inserted in a single-pole manner. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
Due to the insufficient mechanical strength of the product, live parts are accessible, which could result in electric shock to the user. Moreover, the product has an inadequate conductor cross-sectional area, insufficient cable length between the plug and the first socket, and a design flaw allowing the plug to be inserted in a single-pole manner. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
Due to the insufficient mechanical strength of the product, live parts are accessible, which could result in electric shock. Moreover, the product has inadequate conductor cross-section and a flawed design that allows the plug to be inserted in a single-pole manner. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
The solders in the product have an excessive concentration of lead (measured value up to 0.43 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
Due to the insufficient mechanical strength of the product, live parts are accessible, which could result in electric shock. Moreover, the product has an inadequate conductor cross-sectional area and fails to meet the declared requirements for moisture protection. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
Due to the insufficient mechanical strength of the product, live parts are accessible, which could result in electric shock to the user. Moreover, the product has an inadequate conductor cross-section and a flawed design that allows the plug to be inserted in a single-pole manner. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
Due to the insufficient mechanical strength of the product, live parts are accessible, which could result in electric shock. Moreover, the product has an insufficient conductor cross-sectional area and inadequate design, where the extension socket allows for single-pole insertion of the plug. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
The rate of nickel release is too high (measured value up to 1.5 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The product has an excessive concentration of cadmium (measured value up to 19% by weight). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. The product does not comply with the REACH Regulation.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured values: 24% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
The leather in the product contains chromium VI (measured value up to 0.013%). Chromium (VI) is sensitising, can trigger allergic reactions and can cause cancer. The product does not comply with REACH Regulation.
The product has long drawstrings with free ends at the level of the neck. These drawstrings can become trapped during various activities of a child, leading to strangulation. The product does not comply with the General Product Safety Regulation nor with the European standard EN 14682
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 20% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
The toy could rupture and the filling of the inside could come out. The sand inside contains asbestos (measured value up to 5% by weight). Asbestos could cause cancer. The product does not comply with the requirements of the Toy Safety Directive.
The solders and the plastic USB part in the product have an excessive concentration of lead (measured value: up to 23% and 0.27% by weight, respectively). Lead poses a risk to the environment. Moreover, the plastic USB material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 13% and 0.17% by weight, respectively). These phthalates may harm the health by causing possible damage to the reproductive system. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The mounting brackets for the front subframe supporting the toolbox and the rear tailgate latches may not comply with the manufacturer’s specifications. As a result, the subframe mountings could fail, causing the toolbox to detach from the chassis, and the rear tailgate latches could unlock, allowing the tailgate to open while the vehicle is in motion. This could result in unsecured contents falling onto the road, creating an accident risk for other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The airplane has small parts (propeller holder) that can easily detach . Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The appliance can be used with the lid open, allowing direct contact with the grinding blade while it is in motion. This could cause serious cuts to the user. In addition, the product is fitted with a two-pin flat Europlug without earthing which does not provide adequate protection against electric shock. The stainless steel grinding container may become live, the user could touch it and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and 60335-2.
The solders in the product have an excessive concentration of lead (measured value up to 48% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The product has a design flaw that allows the plug of a Class I appliance to be inserted into the socket of an extension cord intended for Class II appliances. Consequently, users may receive an electric shock if a Class I appliance is connected to this extension cord. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60884-1 and EN 60884-2.
The product has a design flaw that allows the plug of a Class I appliance to be inserted into the socket of an extension cord intended for Class II appliances. Consequently, users may receive an electric shock if a Class I appliance is connected to this extension cord. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60884-1 and EN 60884-2.
The product has a design flaw that allows the plug of a Class I appliance to be inserted into the socket of an extension cord intended for Class II appliances. Consequently, users may receive an electric shock if a Class I appliance is connected to this extension cord. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60884-1 and EN 60884-2.
The nipple of the soother could break, potentially generating small parts that could pose a choking hazard to the child. The product does not comply with the General Product Safety Regulation nor with the European standard EN 1400.
The product has a design flaw that allows the plug of a Class I appliance to be inserted into the socket of an extension cord intended for Class II appliances. Consequently, the product offers no protection against electric shock if a Class I appliance is connected to this extension cord. The user could therefore touch accessible, live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor the European standards EN 60884-1 and EN 60884-2.
The rate of nickel release is too high (measured value up to 2 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The solders in the product have an excessive concentration of cadmium and lead. (measured values up to 0.51% and 93% by weight, respectively). Lead and cadmium pose a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solder in the product has an excessive concentration of lead (measured value up to 0.43% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The kink protection of the charging cable has an excessive concentration of cadmium, lead and bis(2-ethylhexyl) phthalate (DEHP) (measured values up to 0.0122%, 37% and 7.9% by weight, respectively). Lead and cadmium pose a risk to the environment. DEHP may pose a risk to human health and the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solder in the product has an excessive concentration of lead (measured value: up to 0.52% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of cadmium and lead. (measured values up to 0.27% and 83% by weight, respectively). Lead and cadmium pose a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
In the outer fabric areas of the product, the detected concentrations of C9–C14 PFCA related compounds are exceeding the limit values. These compounds are extremely persistent, environmentally mobile and may accumulate in the environment. The release of these compounds from articles contributes cumulatively to long term and irreversible environmental contamination, leading to a serious environmental risk. The product does not comply with the REACH Regulation..
The solders and the cable insulation in the product have an excessive concentration of lead (measured value up to 23% by weight). Moreover, the cable insultation of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 6.3% by weight). Lead poses a risk to the environment. DEHP may harm the health by causing possible damage to the reproductive system. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The toys' ears are too long. They could entangle around the neck of the child and create a risk of strangulation. Moreover, the fibrous stuffing material of the toy is easily accessible due to the weakness of the seams. A small child may put the filling material in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Due to the inadequate design, when inserting the mixing beaters intended for normal use of the mixer, a metal beater may come into contact with the metal motor housing, which is separated from live parts only by basic insulation. The user could therefore touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60335-2.
A crank may break during lifting of a load, posing a risk of injuries. The product does not comply with the requirements of the Machinery Directive nor with the European standard EN 1494.
The child may rotate the toy’s wheel by hand while the toy is upside down on the ground, trapping their finger in the gap between the wheel and the metal part on top. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Due to the plug's dimensions, it is possible for the user to insert a Schuko plug into a Class II outlet. Moreover, the plug pins can be touched while they are live. The user could therefore touch accessible, live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The toy consists of small magnets with high magnetic flux (measured value up to 2.44 T²mm²). If a child swallows them, they could attract one another causing intestinal blockage or perforation. The product does not comply with the requirements of the Toy Safety Directive.
The toy contains small parts (hearts, candy, stars) that may easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product expands in size when in contact with water. If a child puts the product in the mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. The product does not comply with the General Product Safety Regulation.
A defective weld on the ISOFIX bar may break in the event of an accident and increase the risk of injury to children in the child seat attached to it. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A defective weld on the ISOFIX bar may break in the event of an accident and increase the risk of injury to children in the child seat attached to it. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A defective weld on the ISOFIX bar may break in the event of an accident and increase the risk of injury to children in the child seat attached to it. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product's plug does not fit the size and dimensional requirements and does not include a fuse. Moreover, the plug pins are too short and too close to the periphery of the plug. The plug could therefore overheat and catch fire. The product does not comply with the requirements of the Low Voltage Directive.
Due to an assembly error the user could receive an electric shock when touching the earth contact of the socket. The product does not comply with the requirements of the Low Voltage Directive.
The product contains a mixture of the preservatives methylisothiazolinone (MI) and methylchloroisothiazolinone (MCI). Dermal contact with MCI and MI containing products can provoke allergic contact dermatitis to sensitised persons. The product does not comply with the requirements of the Toy Safety Directive nor with the European standards EN 71-10 and EN 71-11.
The toy has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured value up to 8.95 % by weight). These phthalates may harm the health of children, causing possibly damage to the reproductive system. Additionally, the product has an excessive concentration of short chain chlorinated paraffins (SCCPs) (measured value: 1.2 % by weight). SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. The product does not comply with the REACH Regulation nor with the Persistent Organic Pollutants (POP) Regulation.
The product contains formaldehyde (measured value up to 408 mg/kg). Formaldehyde is a skin sensitiser and can trigger allergic reactions and may cause cancer. The product does not comply with the REACH Regulation.
The toy has small parts (the green plastic pipe connection) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 0.448 % by weight). These phthalates may harm the health of children, causing possibly damage to the reproductive system. The product does not comply with the REACH Regulation.
The product contains cyanoacrylates that can bond skin and eyes in seconds. The product however does not display the required warnings and hazard labels and lacks child-resistant fastening. Therefore users are not properly informed about the dangers incurred when the product comes into contact with the skin and eyes. The product does not comply with the REACH Regulation nor with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
The appliance is not earthed. In addition, its conductors are not held in position, the accessible metal parts are not sufficiently insulated from the live parts, in particular the conductors of the power supply cable, and the clearance /creepage distances between the live parts of the heating element and the accessible metal part are insufficient. The user may therefore touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The product contains an excessive amount of dichloromethane (measured value: 39.5% by weight), which affects the central nervous system, can impair the neuro-development and behaviour of the unborn child and might cause cancer when inhaled. Furthermore the product contains cyanoacrylates that can bond skin and eyes in seconds. The product however does not display the required warnings and hazard labels and lacks child-resistant fastening, and therefore users are not properly informed about the dangers incurred when the product comes into contact with the skin and eyes. The product does not comply with the REACH Regulation, nor with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
Due to inadequate design and inadequate insulation, the metal part of the blender can become live. Moreover, the product is not sufficiently protected against moisture. The user could therefore access live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60335-2-14.
The plug does not comply with the dimensional requirements. The user can touch the plug pins when they are live and therefore receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The product lacks sufficient insulation. The user can therefore touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
Due to an assembly error the user could receive an electric shock when touching the earth contact of the socket The product does not comply with the requirements of the Low Voltage Directive.
The plug does not comply with the dimensional requirements. The user can touch the plug pins when they are live and therefore receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
Due to an assembly error the user could receive an electric shock when touching the earth contact of the socket. The product does not comply with the requirements of the Low Voltage Directive.
The product contains cyanoacrylates that can bond skin and eyes in seconds. The product however does not display the required warnings and hazard labels and lacks child-resistant fastening, and therefore users are not properly informed about the dangers incurred when the product comes into contact with the skin and eyes. The product does not comply with the Regulation on classification, labelling and packaging of substances and mixtures (CLP).
The plug does not comply with the dimensional requirements. The user can touch the plug pins when they are live and therefore receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The plug does not comply with the dimensional requirements. The user can touch the plug pins when they are live and therefore receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The aluminium chair frame breaks where the inner metal reinforcement ends and the chair may unexpectedly collapse, leading to injuries. The product does not comply with the General Product Safety Regulation nor with the European standards EN 581-1 and EN 581-2.
The rate of nickel release is too high (measured value up to 1.8 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The balloons release an excessive amount of nitrosatable substances (measured total value: 1.45 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-12.
The migration of boron from the toy slime is too high (measured value up to 643 mg/kg). Ingestion or contact with an excessive quantity of boron may harm the health of children by damaging their reproductive system. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-3.
The product has an excessive volume of nicotine-containing liquid (30 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The toy contains small parts (pieces of the paw print) that may easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
A screw fastening on the driver’s seat frame may detach. In the event of an accident, the fastening may not withstand the resulting loads, which could impair the protection provided by the restraint system and increase the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A screw fastening on the frame of the driver’s seat may detach. In the event of an accident, the screw fastening might not withstand the resulting loads. In this case, the protection offered by the restraint system could be impaired as a result of a change in the seating position. Risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The ball joints on the tie rods may not have been heat-treated according to specifications, impairing the steering performance. This could reduce vehicle control and increase the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Deformation of the internal spring inside the centre rear seatbelt mini-buckle may prevent the seatbelt from latching securely. As a result, the centre rear occupant may not be properly restrained in the event of a crash, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The power supply box is fragile and unsealed. The user could therefore touch accessible live parts and receive an electric shock. The power supply box is fragile and unsealed. The user could therefore touch accessible live parts and receive an electric shock. Moreover, the supply cord is too thin, and the dimensions of the plug are non-compliance. This could increase the risk of short-circuits and electric shock for the user. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
The protective earth conductor is not connected and the wire gauge is too thin. Consequently, there is a risk of electric shock and an increased risk of heat build-up and fire. The product does not comply with the requirements of the Low Voltage Directive.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values up to 1.4% and 0.7 by weight, respectively). These phthalates may pose a risk to human health and the environment. Additionally, the solders in the product have an excessive concentration of lead. (measured value up to 80% by weight). and of short chain chlorinated paraffins (SCCPs) ((measured value up to 1% by weight). Lead poses a risk to the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. The product does not comply with the Persistent Organic Pollutants (POP) Regulation nor with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The toy breaks easily releasing small parts. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Due to an assembly error the user could receive an electric shock when touching the earth contact of the socket The product does not comply with the requirements of the Low Voltage Directive.
The appliance contains an excessive amount of R290 propane. in case the appliance is installed in a small room nearby a source of ignition this may cause a fire or explosion in case of leakage. Moreover, the instructions manual has incorrect instructions about the installation of the product and the size of the room where to install it. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-2-40.
The solders in the product have an excessive concentration of lead. (measured value: 53% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The toy's battery compartment opens easily without tools, making the button batteries inside easily accessible. A small child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 62115.
The plastic material of the product has an excessive concentration of dibutyl phthalate (DBP) (measured values up to 20.2% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.