BF · Torch
The battery management system lacks a cell temperature monitoring device. The product can overheat and cause burns. The product does not comply with the General Product Safety Regulation nor with the European standard EN 62133-2.
RecallLookupउत्पाद जांचकर्ता पर वापस जाएँEU Safety Gate · 2026-01-01 →
सत्यापित ऐतिहासिक ईयू सुरक्षा गेट अलर्ट ब्राउज़ करें। प्रत्येक प्रविष्टि अपने पहचाने गए आधिकारिक स्रोत से जुड़ती है।
The battery management system lacks a cell temperature monitoring device. The product can overheat and cause burns. The product does not comply with the General Product Safety Regulation nor with the European standard EN 62133-2.
The product has an excessive concentration of kojic acid (measured value up to 2.77% by weight). Kojic acid can affect the balance of the thyroid system and also induce skin sensitisation, when used at high concentrations on hand and face, or if used on large areas of skin. The product does not comply with the Cosmetic Products Regulation.
The product has an excessive concentration of cadmium (measured value: 87% by weight) and the rate of nickel release is too high (1.6 μg/cm³/week). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The electric air pump has an incorrectly rated fuse. Should a fault occur, the plug may overheat and catch fire. In addition, the mains supply cord has excessive resistance, which may also lead to overheating and fire. The product does not comply with the requirements of the Low Voltage Directive.
The toy has an excessive amount of diisobutyl phthalate (DIBP) (measured value up to 7.4% by weight). This phthalate may harm the health of children, causing possibly damage to the reproductive system. The product does not comply with the REACH Regulation.
The product has inadequate insulation. Additionally, the dimensions of the plug's mains connector face are too small. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product has small parts (white textured bumps on the banana toy) that may easily detach. Small children may put them in the mouth and choke. Moreover, each of the toys in the set (banana, corn cob, grape bunch, strawberry, orange slice, apple and peach) has a protruding part that is too long. Small children may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The chair is not sufficiently resistant to load. As a consequence, it can easily collapse, the user fall and suffer injuries. The product does not comply with the General Product Safety Regulation.
The product has inadequate insulation. Furthermore, due to the undersized plug bridge face, the plug does not fit securely into sockets, creating a hazard where a user's finger can touch live pins during insertion, which could lead to electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product contains small parts (the numbers) that can easily detach from the toy. A small child may put them in the mouth and choke on them. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product expands in size when in contact with water. If a child puts the product in the mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. The product does not comply with the General Product Safety Regulation.
The electric bicycle and its components have not been assessed using relevant conformity assessment procedures. There is no valid technical documentation for the product and no evidence of production control. There is a lack of labelling, marking and instructions. In the absence of evidence to demonstrate the conformity of the bike, battery, and charger, it may be possible for the charger and/or battery to overheat, causing a fire. Additionally, the product was not supplied with a battery. If a consumer purchases and uses a non-compatible battery, it may overheat and cause a fire. The product does not comply with the requirements of the Machinery Directive.
The product has an excessive concentration of hydrogen peroxide as a bleaching substance (measured value: 7,6% by weight). Hydrogen peroxide is harmful if swallowed and it can also cause irritation and ulcers when in contact with skin or mucous membranes. The product does not comply with the Cosmetic Products Regulation.
The chair is not sufficiently stable. The user could therefore fall and suffer injuries. The product does not comply with the General Product Safety Regulation nor with the European standards EN 12520 and EN 1022.
The chair is not sufficiently resistant to load. As a consequence, it can easily collapse and the user fall and suffer injuries. The product does not comply with the General Product Safety Regulation.
The metal part of the watch has an excessive concentration of lead, (measured value 0.072% by weight). Lead is harmful to human health. It accumulates in the body, can cause developmental neurotoxicity and can affect breastfed or unborn children. The product does not comply with the REACH Regulation.
The product may resemble a toy; however, there is a risk of drowning if children play with it unsupervised. Floating seats with leg openings must be used under constant adult supervision and must not have any play elements or overwater structures. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13138.
The product is supplied with a plug without fuse link. The user could therefore receive an electric shock. Additionally, due to the inadequate build quality of the product, its plug and charger, the product could have a fault and catch fire. The product does not comply with the requirements of the Machinery Directive.
A defective weld on the ISOFIX bar may break in the event of an accident and increase the risk of injury to children in the child seat attached to it. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The rear brake calliper may become overloaded and break, which could lead to an accident and injuries This product does not comply with the Regulation on the approval and market surveillance of two- or three-wheel vehicles and quadricycles.
The plug does not meet dimensional requirements and may therefore fail to make a secure connection with the socket. Over time, this could cause the plug to overheat and ignite, leading to a fire. The product does not comply with the requirements of the Low Voltage Directive.
The floodlight has an accessible metal screw in contact with poorly protected electrical wires that are not properly secured. This could damage the wires or expose live parts. Therefore the user can touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The product contains benzyl alcohol which is not indicated on the label. Consumers are not aware of its presence, and may suffer allergic reactions or skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
In certain GLE series vehicles (model series 167) with OM654 and hybrid engines, a shielding plate in the bulkhead area may not have been fitted according to specifications. As a result, the fuel line could rub against the shielding plate and become damaged, causing a fuel leak. This may lead to a drop in fuel pressure and a loss of propulsion without warning, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A defective weld on the ISOFIX bar may break in the event of an accident and increase the risk of injury to children in the child seat attached to it. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product is not equipped with a child-resistant fastening, which creates a chemical risk when in the hands of children. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested The product does not comply with the Regulation on classification, labelling and packaging of substances and mixtures (CLP).
The product lacks adequate insulation between the primary and secondary circuits. The secondary circuit and the connected cable can become live. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product has small parts (fragments of wood) that may easily detach. Small children may put them in the mouth and choke. Additionally, the sharp points on the fragments of wood could lead to injuries. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 71-1.
The toy's battery compartment opens easily without tools, making the button batteries inside easily accessible. A small child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 62115.
The product lacks adequate insulation between the primary and secondary circuits. The secondary USB ports can become live under mains voltage. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary circuit and the connected cable can become live. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The product lacks adequate insulation between the primary and secondary circuits. The secondary circuit and the connected cable can become live. Consequently, the user may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The end of the arches of the playmat are small and prominent enough for a small child to put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The product has an excessive concentration of formaldehyde (measured value: 0.02%). Formaldehyde is a skin sensitiser and can trigger allergic reactions and may cause cancer. The product does not comply with the REACH Regulation.
Due to inadequate insulation of the product, the user can receive an electric shock from easily accessible live parts In addition, the insufficient insulation may cause the product to overheat, leading to a fire. The product does not comply with the requirements of the Machinery Directive nor with the Low Voltage Directive.
The total filtration capacity of the mask is insufficient (measured as low as 42%). Consequently, the product does not fulfil the health and safety requirements. Thus, even if combined with other recommended measures, it may not properly protect. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standard EN 149.
The product does not display the required warnings and hazard labels, such as that the product may cause an allergic reaction (due to the presence of ionone, methyl-, isoeugenol, hexyl salicylate), or may be harmful to aquatic life. Therefore users are not properly informed about the dangers incurred when the product comes into contact with the skin and eyes. The product does not comply with the Regulation on classification, labelling and packaging of substances and mixtures (CLP).
The outer fabric of the coat contains C9–C14 perfluorocarboxylic acid related compounds (PFCAs) (measured value: 1394 µg/kg). These substances bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Moreover, the product has an excessive quantity of perfluorooctanoic-acid-related compounds (PFOAs) (measured value: 1210 µg/kg)). PFOAs are carcinogenic and pose a risk to the environment. The product does not meet the requirements of the REACH Regulation nor of the Persistent Organic Pollutants (POP) Regulation
The toy has small parts (the suction cups) that can easily detach. A small child could put it in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive or with European standard EN 71-1.
The enclosure of the product can easily open. As a result, the user can touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598-2-12.
The enclosure of the product can easily open. As a result, the user can touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598-2-12.
The toy can easily rupture and the filling of the inside could come out. The sand inside contains asbestos (measured value up to 5% by weight). Asbestos could cause cancer. The product does not comply with the requirements of the Toy Safety Directive.
The balloons release an excessive amount of nitrosatable substances (measured total value: 7.70 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive.
The perfume fragrance contains safrole. This substance is genotoxic and can cause liver cancer. It can also cause skin irritation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The toy has small parts (the balls and man figures) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy's battery compartment opens easily without tools, making the batteries inside accessible. A small child could put them in the mouth, the battery may release electrolyte that can be ingested and damage the child's digestive system. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 62115.
The solders in the product have an excessive concentration of lead (measured value up to 78 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 1.57 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 27.3 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The packaging is not childproof and therefore the button batteries are easily accessible to children. A small child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the General Product Safety Regulation nor with the European standard EN 60086-4.
The plastic material of the tablecloth has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 16% by weight). This phthalate may harm the health by causing possible damage to reproductive system. The product does not comply with the REACH Regulation.
The toy has small parts (part of the horn) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The packaging is not childproof and therefore the button batteries are easily accessible to children. A child may put them in the mouth, and choke. The button batteries could also cause damage to the child’s gastrointestinal tract if they are ingested. This product does not comply with the General Product Safety Regulation nor with the European standard EN 60086-4.
The packaging is not childproof and therefore the button batteries are easily accessible to children. A child may put them in the mouth, and choke. The button batteries could also cause damage to the child’s gastrointestinal tract if they are ingested. This product does not comply with the General Product Safety Regulation nor with the European standard EN 60086-4.
The product contains small parts ( the beak and the winding handle) that can easily detach from the toy. A small child may put them in the mouth and choke on them. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The packaging is not childproof and therefore the button batteries are easily accessible to children. A child may put them in the mouth, and choke. The button batteries could also cause damage to the child’s gastrointestinal tract if they are ingested. This product does not comply with the General Product Safety Regulation nor with the European standard EN 60086-4.
The packaging is not childproof as the button batteries are accessible to children. A child could put the batteries in their mouth, which could cause choking. The batteries could also harm the digestive tract if they are swallowed. This product does not comply with the General Product Safety Regulation nor with the European standard EN 60086-4.
The packaging is not childproof and therefore the button batteries are easily accessible to children. A child may put them in the mouth, and choke. The button batteries could also cause damage to the child’s gastrointestinal tract if they are ingested. This product does not comply with the General Product Safety Regulation nor with the European standard EN 60086-4.
The LED light installed in the steps at the entrance door may overheat during use and catch fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The circuit braker is not sensitive enough and can get stuck in the open position. Moreover the polyethylene plate of the device can melt. This can lead to a user coming into contact with live parts and receiving an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60898.
The toy contains small parts (key ring with carabiner, nose, pearl halves) that may easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 71-1.
The plug face does not meet dimensional requirements. This may result in the user receiving an electric shock when removing or inserting the plug from the socket. Additionally, the adaptor has poor internal construction with wires soldered directly to the Printed Circuit Board with no mechanical fixing. The user can touch the accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 24.7% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. Moreover, the plastic of the product has an excessive concentration of polycyclic aromatic hydrocarbons (PAHs)(total measured value 7.35 mg/kg). These PAHs may cause cancer. The product does not comply with the REACH Regulation.
The welding is not sufficiently strong. The frame can therefore break apart due to the weakness at the centre of the bicycle frame. This could cause the rider to fall, which could lead to injuries. The product does not comply with the requirements of the Machinery Directive.
The power supply box is fragile and unsealed. The user could therefore touch accessible live parts such as the exposed printed circuit board and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1.
Due to inadequate insulation of the product, the user can receive an electric shock from easily accessible live parts or if the unsealed fixture accidentally falls into the aquarium water. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-11.
The battery management system lacks a cell temperature monitoring device. During charging, the battery can overheat, explode, and catch fire. This could spread to surrounding materials and cause severe burn injuries to the user. The product does not comply with the General Product Safety Regulation nor with the European standard EN 62133-2.
The battery management system lacks a cell temperature monitoring device. During charging, the battery can overheat, explode, and catch fire. This could spread to surrounding materials and cause severe burn injuries to the user. The product does not comply with the requirements of the General Product Safety Regulation nor with the European standard EN 62133-2.
The product has an excessive concentration of perfluorohexanoic acid-related compounds (PFHxA) (measured values up to >100 mg/kg). PFHxA-related compounds are highly persistent substances that are difficult to remove from the environment and can accumulate over time, posing a risk to human health and the environment. The product does not comply with the REACH Regulation.
The toy's battery compartment opens easily without tools, making the button batteries inside easily accessible. A small child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the requirements of the Toy Safety Directive nor with European standards EN 62115 and EN 71-1.
The fireworks may burst or release burning material outside the safety distance of 8 m or below a height of 3 m, causing burns. Moreover, the product is not stable and may shoot in the wrong direction causing burns and injuries. Additionally, the article may explode during functioning, leading to a risk that consumers may be hit by pyrotechnic effects that could cause burn injuries and, in the worst case, eye injuries. Furthermore, the article may not function fully. A person may find non-fired parts and try to re-ignite these with the risk of being hit by the pyrotechnic effects from the article. Moreover, the article does not extinguish after functioning within 120 seconds, which may cause fire to surrounding objects. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947-5.
The ball joints on the steering rods may have insufficient hardness, which could cause them to break. This may affect vehicle handling and increase the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The actual protection factor of the sunscreen is lower than declared (measured values lower than SPF 2). Consequently, the user will be under-protected against UV radiation increasing the risk of sunburns or skin cancer. The product does not comply with the Cosmetic Products Regulation.
The toy has small parts (the ball and the bean shapes) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The actual protection factor of the sunscreen is lower than declared (measured values as low as SPF 0). Consequently, the user will be under-protected against UV radiation increasing the risk of sunburns or skin cancer. The product does not comply with the Cosmetic Products Regulation.
The seat belt may not be correctly attached to the vehicle body. As a result, the seat belt may not provide adequate restraint in the event of an accident, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The front main wiring harness may come into contact with a metal earthing stud because, following a design harmonisation change, PHEV/BEV vehicles were not fitted with the protective cap used on the MHEV version. Over time, vehicle vibrations could damage the harness insulation, allowing the wires to touch the earthing stud and cause a short circuit. This may lead to a loss of electrical functions and overheating of the wires, increasing the risk of a thermal incident or fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The front main wiring harness may come into contact with a metal earthing stud because, following a design harmonisation change, PHEV/BEV vehicles were not fitted with the protective cap used on the MHEV version. Over time, vehicle vibrations could damage the harness insulation, allowing the wires to touch the earthing stud and cause a short circuit. This may lead to a loss of electrical functions and overheating of the wires, increasing the risk of a thermal incident or fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
There is a defect in the wire gate riveting on these carabiners. This assembly fault could cause the gate to break or detach, posing a risk of carabiner failure in the event of a fall, leading to injuries. This product does not comply with Personal Protective Equipment (PPE) Regulation.
The toy's battery compartment opens easily without tools, making the batteries inside accessible. A small child may put them in their mouth, the battery may release electrolyte that can be ingested and damage the child's digestive system. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 62115.
The toy's battery compartment opens easily without tools, making the batteries inside accessible. A small child could put them in the mouth, the battery may release electrolyte that can be ingested and damage the child's digestive system. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 62115.
The actual protection factor of the sunscreen is lower than declared (measured values lower than SPF 2). Consequently, the user will be under-protected against UV radiation increasing the risk of sunburns or skin cancer. Moreover, the product contains the preservatives. methylchloroisothiazolinone (MCI) and methylisothiazolinone (MI), which are prohibited in leave-on products. These substances cause severe skin burns and eye damage, and may cause an allergic skin reaction. Additionally, the product contains formaldehyde, which is prohibited in cosmetics. Formaldehyde is a skin sensitiser and can trigger allergic reactions and may cause cancer. The product does not comply with the Cosmetic Products Regulation.
The product contains the active substance cloprostenol isopropyl ester (measured value up to 0.003 mg/kg), which should be used under supervision of an ophthalmologist. Cloprostenol isopropyl ester is a prostaglandin analogue, which could cause eye and ophthalmic defects in the user and should not be used by pregnant and breastfeeding women, as it may affect the child. The product does not comply with the Cosmetic Products Regulation.
The toy has small parts (leather medallions) which can easily become detached. A small child could put them in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 71-1.
The solders in the product have an excessive concentration of lead (measured value up to 95% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive).
The solders in the product have an excessive concentration of lead (measured value up to 1.3 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive).
The solders in the product have an excessive concentration of lead (measured value: 47 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of cadmium and lead. (measured values up to 0.08% and 50% by weight, respectively). Lead and cadmium pose a risk to the environment. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive).
The filter transmittance is below the minimum usable level, the view may appear completely dark. Users may then remove or lift the glasses to locate the sun, exposing their eyes directly to solar radiation and creating a risk of damage to sight. The product does not comply with the Personal Protective Equipment Regulation nor with the European standard EN 12312-2 and EN 18526-2.
The product's inadequate construction allows access to the live terminals of the socket from the rear of the product. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards 60884-1 and EN 60884-2.
The fireworks may burst or release burning material over an extended period of time after functioning. The user might reignite the product, which may result in the user being hit by the pyrotechnical effects and matter from the product. This can lead to injuries, burns and damage to sight. The user may bring the product inside and it may release burning material in the building. Consequently, this poses a risk of asphyxiation. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947-5.
Due to a manufacturing fault, the product may break easily leading to cuts. The product does not comply with the requirements of the General Product Safety Regulation.
The crank may break during lifting of a load, posing a risk of injuries. The product does not comply with the requirements of the Machinery Directive nor with the European standard EN 1494.
The filter transmittance is below the minimum usable level, the view may appear completely dark. Users may then remove or lift the glasses to locate the sun, exposing their eyes directly to solar radiation and creating a risk of damage to sight. The product does not comply with the Personal Protective Equipment Regulation nor with the European standard EN 12312-2 and EN 18526-2.
The toy has small parts (the figures and ball bodies) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (suction cups) that can easily detach. Small children could put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European Standard EN 71-1.
The scooter is insufficiently stable. A small child may fall and get injured. Moreover, it has insufficient dynamic strength. The stirring tube may break and have sharp edges. A small child using the toy may receive cuts. Additionally, the scooter’s steering tube may collapse, which may cause the small child using the scooter to fall and sustain an injury. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.