RecallLookupउत्पाद जांचकर्ता पर वापस जाएँEU Safety Gate · 2026-01-01 →
सत्यापित ऐतिहासिक ईयू सुरक्षा गेट अलर्ट ब्राउज़ करें। प्रत्येक प्रविष्टि अपने पहचाने गए आधिकारिक स्रोत से जुड़ती है।
The product contains small parts (the sock of the toy) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The impact absorption capacity of the helmet is insufficient. In the event of an impact, users may suffer head injuries. The product does not comply with the Regulation ECE 22-06.
According to the list of ingredients, the product contains butylphenyl methylpropional (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
In the event of an impact, the helmet could easily become detached and slip off the head of the user, leaving it exposed to injuries. The product does not comply with the Regulation ECE 22-06.
According to the list of ingredients, the product contains butylphenyl methylpropional (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The product contains small parts (the ribbon attaching the toy to the ring) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
According to the list of ingredients, the product contains butylphenyl methylpropional (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
In the event of an impact, the helmet could easily become detached and slip off the head of the user, leaving it exposed to injuries. The product does not comply with the Regulation ECE 22-06.
The dumpling material breaks apart easily, releasing water beads and creating small parts. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The solders in the product have an excessive concentration of lead (measured value: up to 31.3% by weight). Lead poses a risk to the environment. The plastic material of the cable has excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP) and short chain chlorinated paraffins (SCCPs) (measured values: up to 4.27% and 1.32% by weight, respectively). These phthalates pose a risk to human health and the environment.SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the Persistent Organic Pollutants (POP) Regulation.
The solders in the product have an excessive concentration of lead and cadmium (measured value: up to 57.6% and 0.385% by weight, respectively). Lead poses a risk to the environment. Cadmium bio-accumulates and poses a risk to the environment. The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured values: up to 0.45% by weight). This phthalate poses a risk to human health and the environment. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive).
The product has small parts (the small balls). A small child may put them in the mouth and choke. Additionally, if a child puts them in the mouth or swallows it, contact with saliva or stomach liquids will cause them to expand, which can result in occlusion of the respiratory tract or intestinal blockage. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The windings in the transformer are not properly fixed or insulated and are too close to the metal parts. Additionally, the safety distances on the printed circuit board are too small and the distance between the live parts and the appliance’s outer casing is insufficient. As a result, accessible parts could become live, increasing the risk of electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The battery compartment screw does not comply with the requirements for battery compartment fasteners because it becomes detached when loosened. As a result, the button batteries inside are easily accessible. A small child may put the batteries in the mouth and swallow them, which could cause choking and/or severe internal injuries to the gastrointestinal tract. The screw or fastener must remain attached to the battery cover or compartment door when loosened or opened. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 62115.
The plastic material of the product contains an excessive amount of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values up to: 28.85 % and 0.41% by weight, respectively). These phthalates may harm the health of children, causing possible damage to their reproductive system. Moreover, the product has an excessive concentration of short chain chlorinated paraffins (SCCPs) (measured value up to 2.65% by weight).SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. The product does not comply with the REACH Regulation nor with the Persistent Organic Pollutants (POP) Regulation.
The product contains the allergenic fragrance benzyl alcohol, which is not mentioned in the list of ingredients. Consumers are not aware of their presence, and may suffer allergic reactions or skin sensitisation. Moreover, the product lacks appropriate instructions for safe use and the necessary labelling in French. The product does not comply with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
The plastic material of the cable has excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), lead and short chain chlorinated paraffins (SCCPs) (measured values: 4.29 %, 3.37 %, 0.19 % and 1.62 % by weight, respectively). These phthalates pose a risk to human health and the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. The solders in the product have excessive concentrations of lead and cadmium (measured values: up to 78.6 % and 0.148 % by weight, respectively). Lead poses a risk to the environment. Cadmium bio-accumulates and poses a risk to the environment. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive).
The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs) (measured values: 8.7%, 0.23% and 2.05% by weight, respectively). These phthalates pose a risk to human health and the environment. The solders in the product have an excessive concentration of lead (measured value: up to 0.47% by weight). Lead poses a risk to the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive).
The plastic material of the toy has an excessive concentration of dibutyl phthalate (DBP) (measured value up to 0.27% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation nor with the requirements of the Toy Safety Directive.
The product contains hydroxyisohexyl 3-cyclohexene carboxaldehyde (HICC), which is prohibited in cosmetic products. HICC may cause an allergic skin reaction. The product does not comply with the Cosmetic Products Regulation
The rate of nickel release is too high (measured value up to 29.8 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. Additionally, the product has an excessive concentration of lead (measured value: 12.5% by weight). Lead is harmful to human health, accumulates in the body, can cause developmental neurotoxicity (only if exposure to children expected) and may affect breast-fed or unborn children. The product does not comply with the REACH Regulation.
The rate of nickel release is too high (measured value up to 2.91 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The toy has small parts (hearts, tree decoration, stars) that can easily detach. A small child could put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The earthing conductor is shorter than the current-carrying conductors. If the supply cord slips out of its anchorage, the earthing connection could therefore disconnect first, while the live conductors remain connected. This could leave accessible metal parts unearthed and potentially live, increasing the risk of electric shock. The product does not comply with the requirements of the Radio Equipment Directive.
The clearance and the creepage distance between the live parts of the product is inadequate, which creates a risk of electric shock and fire. The product does not comply with the requirements of the Low Voltage Directive.
The circular saw blade is marketed as an attachment that can be mounted on an angle grinder and the device could therefore, contrary to its intended use, be used as a hand-held circular saw. This could cause kickback or loss of control over the tool, resulting in injuries. The product does not comply with the requirements of the Machinery Directive nor with the European standards EN 60745-2-3 and EN 62841-2-3.
The rate of nickel release is too high (measured value up to 12.32 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The brooches have an excessive concentration of cadmium (measured value: 4% by weight). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. The product does not comply with the REACH Regulation nor with the General Product Safety Regulation.
The rate of nickel release is too high (measured value up to 96 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
This product has an excessive concentration of Isoeugenol (measured value: up to 0.14% by weight). This substance may cause an allergic skin reaction. This substance is not listed in the list of ingredients, and could cause an allergic reaction in a person who unknowingly comes into contact with the product. The product does not comply with the requirements of the Cosmetic Products Regulation.
The product has long functional cords with free ends in the waist. These cords could become trapped during the child’s various activities, leading to strangulation. The product does not comply with the General Product Safety Regulation nor with the European standard EN 14682
The soft toy has small parts (chain and bow-shaped cape fastener) that can easily detach. A small child could put them in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product's insulation and distances between the circuits are insufficient. The user could access live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 61558-2-16 and EN 61558-1
Floating seats with leg openings must be used under constant adult supervision and must not have any play elements or overwater structures. There is a risk of drowning if children play with it unsupervised. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13138-3.
The solders in the product have an excessive concentration of lead (measured value: up to 67.4% by weight). The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs) (measured values: up to 0.19 %, 3.68 % and 0.68 % by weight, respectively). Lead poses a risk to the environment and phthalates poses a risk to human health and the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the Persistent Organic Pollutants (POP) Regulation.
The rate of nickel release is too high (measured value up to 69 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The height of the guardrail is insufficient and therefore does not protect against falls. Additionally, the spacing between the rails is too large. A child could slip between them and fall. The product does not comply with the General Product Safety Regulation.
The rate of nickel release is too high (measured value up to 20 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The solders in the product have excessive concentrations of lead and cadmium (measured values up to 70% and 0.125% by weight, respectively). The plastic material of the cable has an excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs) (measured values: 1.73%, 2.07% and 4.98% by weight, respectively). These phthalates pose a risk to human health and the environment. Cadmium bio-accumulates and poses a risk to the environment. Lead poses a risk to the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the Persistent Organic Pollutants (POP) Regulation.
The solders in the product have excessive concentrations of lead and cadmium (measured values: up to 72.7% and 0.1% by weight, respectively). The plastic material of the cable has excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs) (measured values up to 2.83%, 1.43% and 2.21% by weight, respectively). Lead poses a risk to the environment. Cadmium bio-accumulates and poses a risk to the environment. These phthalates poses a risk to human health and the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the Persistent Organic Pollutants (POP) Regulation.
The solders in the product have an excessive concentrations of lead and cadmium (measured values up to 38.8% and 0.12% by weight, respectively). The plastic material of the cable has an excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs) (measured values: 4.27%, 3.62% and 2.51% by weight, respectively). Lead poses a risk to the environment. Cadmium bio-accumulates and poses a risk to the environment. These phthalates poses a risk to human health and the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the Persistent Organic Pollutants (POP) Regulation.
The solders in the product have excessive concentrations of lead and cadmium (measured values up to 33.7% and 0.18% by weight, respectively). Lead poses a risk to the environment. Cadmium bio-accumulates and poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 36.9% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 69.3% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 54% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have excessive concentrations of lead and cadmium (measured values up to 77.6% and 0.21% by weight, respectively). Lead poses a risk to the environment. Cadmium bio-accumulates and poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The live parts of the lamp cap are accessible when the lamp is partially screwed into the lampholder of the luminaire, leading to electric shock. Consequently, the user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive and the relevant European standard EN IEC 60598.
The respiratory masks have not undergone the required conformity tests for personal protective equipment category III. Using the product in areas where sanding, painting and polishing take place, and for protection against fine particulate matter and gases, entails a risk of contact with substances and mixtures that are hazardous to health. The product does not comply with the Personal Protective Equipment Regulation (PPE).
In the event of an impact, the helmet's retention system could easily become detached and the helmet could completely slip off the head of the user, leaving it exposed to injuries. The product does not comply with the Regulation ECE 22-06.
The impact absorption capacity of the helmet is insufficient. In the event of an impact, users may suffer head injuries. The product does not comply with the Regulation ECE 22-06.
The impact absorption capacity of the helmet is insufficient. In the event of an impact, users may suffer head injuries. The product does not comply with the Regulation ECE 22-06.
The balloons release an excessive amount of nitrosatable substances (measured total value: 1.8 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive.
The impact absorption capacity of the helmet is insufficient. In the event of an impact, users may suffer head injuries. The product does not comply with the Regulation ECE 22-06.
In the event of an impact, the helmet's retention system could easily become detached and the helmet could completely slip off the head of the user, leaving it exposed to injuries. The product does not comply with the Regulation ECE 22-06.
The dark blue plastic material of the product contains an excessive concentration ofbis(2-ethylhexyl) phthalate (DEHP) (measured value: 0.17 % by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH regulation.
The solders in the product have an excessive concentration of lead (measured value up to 32.5% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 50.9 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have excessive concentrations of lead and cadmium (measured values up to 78.6 % and 0.385 % by weight, respectively). Lead poses a risk to the environment. Cadmium bio-accumulates and poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders have an excessive concentration of lead (measured value up to 69.7% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 48.8% by weight). The plastic material of the cable has excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs) (measured values up to 1.47%, 0.55% and 0.62% by weight, respectively). Lead poses a risk to the environment. The phthalates pose a risk to human health and the environment.SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the Persistent Organic Pollutants (POP) Regulation.
The product has excessive concentrations of cadmium and bis(2-ethylhexyl) phthalate (DEHP) (measured values up to 0.021% and 16.16% by weight, respectively). DEHP may harm the health by causing possible damage to the reproductive system. Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. The product does not comply with the REACH Regulation.
The toy consists of small magnets with high magnetic flux (measured value up to 102 kg²mm²). If a child swallows them, they could attract one another causing intestinal blockage or perforation. Moreover, the magnets are small parts. A child can put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The ribbons to be fastened in the area of the forearms and the calves are too long. They can become trapped during various activities of a child, leading to entrapment. This product does not comply with the requirements of the Toy Safety Directive.
The transparent cover of the product can be removed by hand without any tools by simply twisting it, leaving live parts easily accessible. The user could touch them and therefore receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62368-1.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The protective grille of the product can be removed during routine maintenance, leaving live parts accessible. Consequently, the user may touch them and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The intensity of the blue LED light in the toy is too powerful. Direct viewing of the light could cause damage to sight. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 62115.
The rate of nickel release is too high (measured value up to 0.37 µg/cm2/week) and the product has an excessive concentration of cadmium (measured value: 75.8% by weight). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. The product does not comply with the REACH Regulation.
The toy has small parts (small magnets in the sticks) that can easily detach. A small child may put them in the mouth and choke. Moreover, the small magnets have a high magnetic flux (measured value up to 708 Kg²mm). If a child swallows the magnets, they could attract one another causing intestinal blockage or perforation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product has a small part (ball) that can easily detach. Small children may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The product has long drawstrings with free ends at the level of the neck. These drawstrings can become trapped during various activities of the child, leading to strangulation and injuries. The product does not comply with the General Product Safety Regulation nor with the European standard EN 14682.
The toy has small parts (small magnets in the sticks) that can easily detach. A small child may put them in the mouth and choke. Moreover, the small magnets have a high magnetic flux (measured value up to 308 Kg²mm). If a child swallows the magnets, they could attract one another causing intestinal blockage or perforation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
A manufacturing defect in the second-stage spindle assembly may restrict the flow of breathing gas at depths exceeding 45 metres. As a result, the regulator may not supply sufficient breathing gas when required, which could lead to drowning. The product does not comply with the Personal Protective Equipment (PPE) Regulation.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
The toy has small parts (stickers) that can easily detach. Small children may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard 71-1.
The internal elements of the product are not properly attached and may contact the metal casing. Moreover, the wires are not adequately insulated and can easily tear. Additionally, the lamp socket is not sufficiently secured, which allows free rotation of light with possibility of detachment. Live parts may become accessible to the user which may result in an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
The product has an excessive quantity of C9-C14 PFCA-related substances. These substances bio-accumulate in wildlife and humans, posing a risk to human health and the environment. The product does not comply with the POP Regulation nor with the REACH Regulation.
The toy consists of small magnets with high magnetic flux (measured value up to 406 kg²mm²). If a child swallows them, they could attract one another causing intestinal blockage or perforation. Moreover, the magnets are small parts. A child can put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy consists of small magnets with high magnetic flux (measured value up to 215 kg²mm²). If a child swallows them, they could attract one another causing intestinal blockage or perforation. Moreover, the magnets are small parts. A child can put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (plastic eyes) that can easily detach and break. A small child could put them in the mouth and choke. The product does not comply with the Toy Safety Directive nor with the European standard EN 71-1.
The battery compartment can easily be opened without use of any tools and the batteries inside are easily accessible. If a child puts them in the mouth, the batteries can overheat and release electrolyte which can be ingested by the child and cause damage to the gastrointestinal tract. The product does not comply with the requirements of the Toy Safety Directive.
The toy consists of small magnets with high magnetic flux (measured value up to 739 kg²mm²). If a child swallows them, they could attract one another causing intestinal blockage or perforation. Moreover, the magnets are small parts. A child can put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product lacks sufficient insulation, making live parts accessible. Additionally, the unit lacks a proper mechanical wire strain relief device, the structure allows single-pole insertion of plugs, and the mains plug does not meet the dimensional requirements. The user could touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
The plastic material of the cable has an excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs) (measured values: up to 2.86%, 1.11% and 0.96% by weight, respectively). These phthalates poses a risk to human health and the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. The solders in the product have an excessive concentrations of lead (measured value: up to 41.4 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the Persistent Organic Pollutants (POP) Regulation.
The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), lead and short chain chlorinated paraffins (SCCPs) (measured values: up to 6.35%, 0.23% and 0.6% by weight, respectively). This phthalates poses a risk to human health and the environment.SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. The solders in the product have excessive concentrations of lead and cadmium (measured values: up to 70.8% and 0.15% by weight, respectively). Lead poses a risk to the environment. Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones, and it may cause cancer. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the Persistent Organic Pollutants (POP) Regulation.
The plastic material of the cable has an excessive concentrations of dibutyl phthalate (DBP), lead and short chain chlorinated paraffins (SCCPs) (measured values: up to 6.1%, 0.24% and 1.4% by weight, respectively). . This phthalate poses a risk to human health and the environment. Lead poses a risk to the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. Additionally, the solders in the product have an excessive concentrations of lead and cadmium (measured values: up to 63.7% and 0.15% by weight, respectively). Cadmium bio-accumulates and poses a risk to the environment. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the Persistent Organic Pollutants (POP) Regulation.
The laser beam of the projector is too powerful (measured value up to 32 mW) and the product is not properly labelled. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the General Product Safety Regulation nor with the European standards EN 60825-1.
The solders in the product have excessive concentrations of lead and cadmium (measured values up to 73.9% and 0.26% by weight, respectively). Lead poses a risk to the environment. Cadmium bio-accumulates and poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have excessive concentrations of lead and cadmium (measured values: up to 81.5% and 0.6 % by weight, respectively). Lead poses a risk to the environment. Cadmium bio-accumulates and poses a risk to the environment. The plastic material of the cord has excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) lead and short chain chlorinated paraffins (SCCPs) (measured values: up to 3.43%, 2.42%, 0.22% and 1.11% by weight, respectively). These phthalates pose a risk to human health and the environment.SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the Persistent Organic Pollutants (POP) Regulation.
The solders in the product have an excessive concentration of lead (measured value up to 78.5 % by weight). The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and short chain chlorinated paraffins (SCCPs) (measured values up to 2.9 %, 1.9 % and 3.6 by weight, respectively). The phthalates pose a risk to human health and the environment. Lead poses a risk to the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the Persistent Organic Pollutants (POP) Regulation.
The product's live and neutral connection markings are reversed and the user could use the wiring incorrectly. This could cause a fire and the user could receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The solders in the product have an excessive concentration of lead (measured value up to 28.2 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The plastic material of the cables has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), lead and short chain chlorinated paraffins (SCCPs) (measured values: up to 2.61%, 0.6%, 0.145% and 2.47% by weight, respectively). These phthalates poses a risk to human health and the environment. Lead poses a risk to the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the Persistent Organic Pollutants (POP) Regulation.
The toy has small parts (suction cup) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), lead and short chain chlorinated paraffins (SCCPs) (measured values: up to 7.2%, 0.24%, 0.21% and 1.59% by weight, respectively). These phthalates poses a risk to human health and the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Prolonged exposure to them through the skin may cause cancer. The solders in the product have an excessive concentration of lead and cadmium (measured values: up to 67% and 0.15% by weight, respectively). Lead poses a risk to the environment. Cadmium bio-accumulates and poses a risk to the environment. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the Persistent Organic Pollutants (POP) Regulation.
The height of the guardrail is insufficient and therefore does not protect against falls. The product does not comply with the General Product Safety Regulation.
The product lacks adequate insulation. The product may overheat causing the insulating material to melt, leaving live parts accessible. The user can therefore easily access live parts and receive an electric shock. Additionally, the base of the product lacks an automatic shut-off mechanism. The product could therefore overheat, causing burns to the user. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and 60335-2.
The soother holder is too long, it can become wrapped around the neck of the child, causing strangulation. The product does not comply with the General Product Safety Regulation.
The toy's battery compartment opens easily without tools, making the button batteries inside easily accessible. A small child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 62115.
There is no evidence that the product has been assessed using relevant conformity assessment procedures. There is no valid technical documentation for the product and no evidence of production control. Furthermore, there is a lack of labelling, marking and instructions. In the absence of evidence to demonstrate the conformity of the product, it may be possible for it to overheat and catch fire. The product does not comply with the requirements of the Machinery Directive.