RecallLookupÜrün denetleyicisine geri dönEU Safety Gate · 2026-01-01 →
Doğrulanmış geçmiş AB Güvenlik Kapısı uyarılarına göz atın. Her giriş, tanımlanmış resmi kaynağına bağlantı verir.
The costume has long functional cords with free ends in the neck area. These cords could become trapped during the child’s various activities, leading to strangulation. The toy does not comply with the requirements of the Toy Safety Directive nor with the European standards EN 71-1 and EN 14682.
The product has a loop to adjust the garment around the neck and it has a sharp element. This could cause choking or strangulation if used by a child. The product does not comply with the General Product Safety Regulation nor with the European standards EN 16732 and EN 14682.
The toy has an excessive concentration of dibutyl phthalate (DBP) and bis(2-ethylhexyl) phthalate (DEHP) (measured values: 0.16% and 0.16% by weight, respectively). These phthalates may harm the health of children, causing possible damage to their reproductive system. Moreover, the toy has an excessive concentration of di-‘isononyl’ phthalate (DINP) (measured value: 0.37% by weight). This phthalate may harm the health of children, causing possible damage to their reproductive system and liver. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation.
The product has small parts (key chain, nosepiece, beads of the necklace) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The migration of chromium VI from the textile labels is too high (measured value up to 8.9 mg/kg). Chromium (VI) is sensitising, can trigger allergic reactions and can cause cancer. The product does not comply with the REACH Regulation.
The product contains cyanoacrylates that can bond skin and eyes in seconds. The product however does not display the required warnings and hazard labels and lacks child-resistant fastening. Therefore users are not properly informed about the dangers incurred when the product comes into contact with the skin and eyes. The product does not comply with the Regulation on classification, labelling and packaging of substances and mixtures (CLP).
The plug does not meet the dimensional requirements. The distance between the outer edge of the plug and the live pin is insufficient, and the earth and live pins are too short. As a result, the plug may not connect securely to a socket, potentially exposing live parts to the user. Moreover, the plug also does not have the capacity for a fuse, which is required to ensure the safe operation of the product under fault conditions. Users may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The affected batches may emit feedback noise (measured value up to 106 dBA) through the headset speakers, leading to damage to hearing. The likelihood of occurrence of this issue can be increased in cold ambient temperatures and with a depleted battery state. The product does not comply with the Personal Protective Equipment Regulation.
A fault in the fuel supply control unit may prevent the vehicle from correctly switching between the main and auxiliary fuel tanks. This could cause a loss of engine power while driving or lead to fuel spilling onto the road, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Software inconsistency may prevent certain warning lights and mandatory indications from being correctly displayed on the dashboard. As a result, the driver may not be informed of vehicle malfunctions or safety-related situations, which could increase the risk of an accident or lead to overheating of electrical circuits. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A joint on the pyrotechnic gas generator in the front seat belt pretensioners may not have been properly welded. In the event of an accident, small parts could detach, increasing the risk of injury to passengers. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Software inconsistency may prevent certain warning lights and mandatory indications from being correctly displayed on the dashboard. As a result, the driver may not be informed of vehicle malfunctions or safety-related situations, which could increase the risk of an accident or lead to overheating of electrical circuits. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to incorrect software calibration, the lithium-ion battery controller may not reliably detect battery cell anomalies. It may incorrectly identify faults because of electrical interference or fluctuations in circuit resistance. As a result, the system may switch to fail-safe mode while the vehicle is being driven, limiting engine power and preventing charging. Under certain conditions, this could turn off the main relay and cause a loss of propulsion, meaning the vehicle may come to a stop while in motion, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The toy could rupture and the filling of the inside could come out. The sand inside contains asbestos (measured value up to 5% by weight). Asbestos could cause cancer. The product does not comply with the requirements of the Toy Safety Directive.
The toy could rupture and the filling of the inside could come out. The sand inside contains asbestos (measured value up to 5% by weight). Asbestos could cause cancer. The product does not comply with the requirements of the Toy Safety Directive.
The balloons release an excessive amount of nitrosatable substances (measured total value: 0.13 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-12.
The solders of the product have an excessive concentration of lead (measured value up to 46% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The toys have small parts (beaks and hands) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
High levels of C9–C14 Perfluoroalkyl carboxylic acids were found in the outer fabric of the product. These chemicals are very difficult to break down, can spread through the environment and may build up over time. Their release from products can contribute to long-lasting and potentially irreversible pollution, posing a serious risk to the environment. The product does not comply with the REACH Regulation.
The product has an excessive concentration of benzene (measured value up to 2460 mg/kg). Benzene is mutagenic and causes cancer. The product does not comply with the REACH Regulation.
The solders in the product have an excessive concentration of lead (measured value up to 83% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive).
High levels of C9–C14 Perfluoroalkyl carboxylic acids were found in the outer fabric of the product. These chemicals are very difficult to break down, can spread through the environment and may build up over time. Their release from products can contribute to long-lasting and potentially irreversible pollution, posing a serious risk to the environment. The product does not comply with the REACH Regulation.
The solders in the product have an excessive concentration of lead (measured value up to 37 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 91% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive).
The nipple of the soother could break, potentially generating small parts that could pose a choking hazard to the child. The product does not comply with the General Product Safety Regulation nor with the European standard EN 1400.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The rate of nickel release is too high (measured value up to 1.17 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The product has long drawstrings with free ends at the level of the neck. These drawstrings can become trapped during various activities of a child, leading to strangulation. The product does not comply with the General Product Safety Regulation nor with the European standard EN 14682.
The toy contains a small part (the label) that may easily detach. A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy contains small parts (eyes and nose) that may easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The heat transfer fluid‘s auto-ignition temperature of the solar collector is too low. Under high outside temperatures if a leak develops, allowing sufficient fluid to escape, a fire may develop. The risk is caused exclusively by specific heat transfer fluids. The product does not comply with the Construction Products Regulation.
The integrated battery may overheat, which could lead to a fire. The product does not comply with the requirements of the Low Voltage Directive.
The convenience charging electronics module may have a manufacturing fault. If the module fails during charging, electrical current may flow through the vehicle body. As a result, touching the vehicle body could expose the user to a high-voltage electric shock. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Cracks in the fuel line could lead to a fuel leak above the exhaust after-treatment systems. If the leaking fuel comes into contact with hot components, it could ignite and cause a vehicle fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The copper wires in the cable may fray during use. This could damage the cable insulation and expose live parts, which the user may touch and receive an electric shock. The frayed wires could also cause overheating, potentially leading to a fire. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN-60335-1.
The rear brake line may rub against the body control module and develop a leak. This could reduce rear-wheel braking performance, increasing the risk of an accident and injury. The product does not comply with the Regulation on the approval and market surveillance of two- or three-wheel vehicles and quadricycles.
The sleeving of the power supply cable may become damaged during use, which could expose live parts. The user could touch it and receive an electric shock. Moreover, the damage could also cause the product to overheat and melt, creating a risk of fire. The product does not comply with the requirements of the Low Voltage Directive.
The gate of the carabiner can malfunction and may not close automatically. This creates a risk of unintended detachment during use, which could result in a fall from height. This product does not comply with Personal Protective Equipment (PPE) Regulation.
The toy has small parts (necklace, eyes) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The creepage distances between the primary and secondary circuits and the insulation of the product are inadequate. The user could therefore touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62368-1.
The creepage distances between the primary and secondary circuits are inadequate. The user could therefore touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The solders in the product have an excessive concentration of lead (measured value up to 48 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead. (measured value up to 72 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 31 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 81 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
Floating seats with leg openings must be used under constant adult supervision and must not have any play elements or overwater structures. There is a risk of drowning if children play with it unsupervised. The product does not comply with the General Product Safety Regulation.
The strength and the effectiveness of the helmet are inadequate. In the event of an impact, users may suffer head injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation.
The strength and the effectiveness of the helmet are inadequate. In the event of an impact, users may suffer head injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation.
The electrical insulation between the transformer’s primary and secondary enamelled windings is inadequate and insufficient. As a result, the user can touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60335-2.
When using the chair with dynamic seat backrest adjustment, the backrest can break when the user leans back. This can lead to a fall and injuries. The product does not comply with the General Product Safety Regulation.
The filter transmittance is below the minimum usable level, the view may appear completely dark. Users may then remove or lift the glasses to locate the sun, exposing their eyes directly to solar radiation and creating a risk of damage to sight. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standards EN 12312-2 and EN 18526-2.
The filter transmittance is below the minimum usable level, the view may appear completely dark. Users may then remove or lift the glasses to locate the sun, exposing their eyes directly to solar radiation and creating a risk of damage to sight. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standards EN 12312-2 and EN 18526-2.
The product lacks a sufficient nominal conductor cross-section, which can result in burns, fire or electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
The filter transmittance is below the minimum usable level, the view may appear completely dark. Users may then remove or lift the glasses to locate the sun, exposing their eyes directly to solar radiation and creating a risk of damage to sight. The product does not comply with the Personal Protective Equipment Regulation nor with the European standard EN 12312-2 and EN 18526-2.
The product is highly flammable but lacks a tactile warning of danger. Partially sighted persons are not informed that it is a dangerous product. The product does not comply with the Regulation on classification, labelling and packaging of substances and mixtures (CLP).
The balloons release an excessive amount of nitrosatable substances (measured total value: 2.06 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-12.
The toy contains small parts (collar) that may easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy contains small parts (bristles of the brush) that may easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The solders in the product have an excessive concentration of cadmium and lead. (measured value: up to 0.42% and 0.23% by weight, respectively). Cadmium bio-accumulates and poses a risk to the environment. Lead poses a risk to the environment. Moreover, the plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 3.3 % and 5.1% by weight, respectively). These phthalates may pose a risk to human health and the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
Intensive use may lead to the formation of a crack at the junction of the frame and the stem. This defect could cause this junction to break, resulting in a risk of the user falling, leading to injuries. The product does not comply with the requirements of the Machinery Directive.
Small parts of the dumpling can easily release. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Due to the insufficient mechanical strength of the product, live parts may become easily accessible to the user, who could receive an electric shock. The product also has an inadequate conductor cross-section and a flawed design that allows the plug to be inserted in a single-pole manner. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
The toy breaks easily releasing small parts (the ring and the links of the keychain). A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
Small parts of the dumpling can easily release. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Due to the insufficient mechanical strength of product, live parts may become easily accessible to the user, who could receive an electric shock. Additionally, the product has an inadequate conductor cross-sectional area, insufficient cable length between the plug and the first socket, and a design flaw allowing a plug to be inserted into the extension socket in a single-pole manner. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
Due to the insufficient mechanical strength of product, live parts may become easily accessible to the user, who could receive an electric shock. Additionally, the product has an inadequate conductor cross-sectional area, insufficient cable length between the plug and the first socket, and a design flaw allowing a plug to be inserted into the extension socket in a single-pole manner. Furthermore, the conductors of the product lack sufficient insulation The product does not comply with the requirements of the Low Voltage Directive and the relevant European standards EN 60598-1 and EN 60598-2-20.
Small parts of the dumpling can easily release. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Due to the insufficient mechanical strength of the product, live parts may become easily accessible to the user, who could receive an electric shock. The product also has an inadequate conductor cross-sectional area. Furthermore, the conductors of the product lack sufficient insulation. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
Small parts of the dumpling can easily release. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
In case the outer pane of the panoramic roof window breaks, the remaining inner pane may detach from the vehicle while in motion. This creates a hazard for other road users and increases the risk of an accident or injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product presents a serious risk of injuries as it is supplied with an attachable canopy. In windy conditions, the canopy could cause the product to lift from the water. The child could fall from the product and be injured by impact or by drowning in the water. The product does not comply with the General Product Safety Regulation.
The toy has an excessive concentration of dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), bis(2-ethylhexyl) phthalate (DEHP), diisobutyl phthalate (DIBP), di-‘isononyl’ phthalate (DINP) and di-‘isodecyl’ phthalate (DIDP) (measured values: 0.03 %, 0.01 %, 8.3 %, 0.01 %, 0.02% and 0.02% by weight, respectively). These phthalates may harm the health of children, causing possibly damage to the reproductive system. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation.
The balloons release an excessive amount of nitrosatable substances (measured total value: 0.28 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-12.
The product has small parts that can easily detach (keychain ring and orange "fruit" on top of the capybara's head). Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The rivets attaching the knives to the flail-cutter’s main body could break. The knives might consequently detach during use and hit the user, causing injuries. The product does not comply with the requirements of the Machinery Directive nor with the Commission Decision 2012/32/EU prohibiting the placing on the market of flail-type cutting attachments for portable hand-held brush cutters.
The protective earth conductor is not connected and the cross-section of the cable is too small. This results in a risk of electric shock and an increased risk of heat build-up and fire. The product does not comply with the requirements of the Low Voltage Directive.
The toy contains a small part (metal bell) that may easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The balloons release an excessive amount of nitrosatable substances (measured total value: 2.2 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-12.
The toy has an excessive concentration of dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), bis(2-ethylhexyl) phthalate (DEHP), diisobutyl phthalate (DIBP), di-‘isononyl’ phthalate (DINP), di-‘isodecyl’ phthalate (DIDP) and di-n-octyl phthalate (DNOP) (measured values: 0.54%, 0.01%, 0.17%, 0.01%, 0.01%, 0.01% and 0.01% by weight, respectively). These phthalates may harm the health of children, causing possibly damage to the reproductive system. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation.
The toy has an excessive concentration of dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), bis(2-ethylhexyl) phthalate (DEHP) and diisobutyl phthalate (DIBP) (measured values: 0.08%, 0.01%, 0.98% and 0.01% by weight, respectively). These phthalates may harm the health of children, causing possibly damage to the reproductive system. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation.
The rate of nickel release is too high (measured value up to 0.59 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The toy has small parts (beads and small cubes) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product contains cyanoacrylates that can bond skin and eyes in seconds. The product however does not display the required warnings and hazard labels and lacks child-resistant fastening. Therefore users are not properly informed about the dangers incurred when the product comes into contact with the skin and eyes. The product does not comply with the Regulation on classification, labelling and packaging of substances and mixtures (CLP).
Manufacturing errors in the production of steering components may reduce their fatigue strength and make them susceptible to breakage. If a component breaks, the steering system may fail, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Corrosion may cause the mounting bolts and front control-arm joints to break. This could affect the vehicle’s handling and make it unpredictable, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The solders in the product have an excessive concentration of lead. (measured value: 34% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The creepage distances between the primary and secondary circuits are inadequate. The user could therefore touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
Improperly secured screws may cause the access panels to open while the vehicle is in motion. This could create a hazard for vehicle occupants and other road users, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
Due to the insufficient mechanical strength of the product, live parts are accessible, which could result in electric shock to the user. Moreover, the product has an inadequate conductor cross-section and a flawed design that allows the plug to be inserted in a single-pole manner. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
Due to the insufficient mechanical strength of the product, live parts are accessible, which could result in electric shock to the user. Moreover, the product has an inadequate conductor cross-sectional area, insufficient cable length between the plug and the first socket, and a design flaw allowing the plug to be inserted in a single-pole manner. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
Due to the insufficient mechanical strength of the product, live parts are accessible, which could result in electric shock. Moreover, the product has inadequate conductor cross-section and a flawed design that allows the plug to be inserted in a single-pole manner. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
The solders in the product have an excessive concentration of lead (measured value up to 0.43 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).