RecallLookupÜrün denetleyicisine geri dönEU Safety Gate · 2026-01-01 →
Doğrulanmış geçmiş AB Güvenlik Kapısı uyarılarına göz atın. Her giriş, tanımlanmış resmi kaynağına bağlantı verir.
The gap between the seat and the pad is too small, which could cause the child's head or limbs to be trapped there. The crotch blocker is too low and does not stop the child from slipping. The child could therefore fall and suffer injuries. The product does not comply with the General Product Safety Regulation nor with the European standard EN 14988.
The baby carrier lacks the required instructions for correct use. This could lead to a child not being properly secured in the baby carrier, or the product being incorrectly set, which could cause the baby to fall and suffer injuries. The product does not comply with the General Product Safety Regulation.
The product has inadequate insulation. Moreover, the dimensions of the power socket do not comply with the specifications. The user could touch accessible live parts, and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335.
The product has inadequate insulation. Moreover, the dimensions of the power socket do not comply with the specifications. The user could touch accessible live parts, and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The total filtration capacity of the mask is insufficient (measured as low as 80 %). Consequently, the product does not fulfil the health and safety requirements. Thus, even if combined with other recommended measures, it may not properly protect. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standard EN 149.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values up to 25.06% and 0.15% by weight, respectively). These phthalates may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the REACH Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The internal connections are inadequate and these connections could loosen causing the product to become live. The user could touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Machinery Directive.
The insulation and dimensions of the power socket of the product are inadequate. The user could touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335.
The appliance’s plug is designed to withstand a maximum current of 2.5 A, despite the appliance requiring 4.5 A. The plug, cable or socket may overheat, possibly leading to a risk of fire. The product does not comply with the requirements of the Low Voltage Directive.
The wheel bolts used do not meet the requirements and may detach, leading loss of driving stability, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The fireworks may burst or eject burning material below a height of 30 m, causing injuries and/or burns and/or a fire to the user or bystanders. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947
The product has insufficient mechanical strength, insufficient nominal cross-section of the conductors and the extension socket allows for single-pole insertion. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
The product has insufficient mechanical strength and there is insufficient nominal cross-section of the conductors. Moreover, the structure of the cord extension socket allows single-pole insertion of plugs. and there is insufficient length of the cable between the plug and the first bulb. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
The product has insufficient mechanical strength, insufficient nominal cross-section of the conductors and the structure of the cord extension socket allows single-pole insertion of plugs. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
The product is not protected against moisture, despite being recommended for outdoor use. Moreover, the product has an insufficient nominal cross-section of the wires and the extension socket allows a single-pole plug to be inserted. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
The product contains asbestos fibres (measured value: 0.33% by weight). Asbestos could cause cancer. The product does not comply with the REACH Regulation nor with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
The product contains a mixture of the preservatives methylchloroisothiazolinone (MCI) and methylisothiazolinone (MI), which are prohibited in leave-on cosmetics. MCI and MI cause severe skin burns and eye damage and may cause an allergic skin reaction. The product does not comply with the Cosmetic Products Regulation.
The retro-reflective material does not have the required reflectance values and the user is not adequately visible in situations where high visibility is essential. This can lead to injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standard EN 20471.
The cord of the plastic net bag is too long. It can become wrapped around the neck of a child, leading to strangulation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (the eyes, snap-fit fasteners, collar eyelets and beads) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Inadequate protection allows access to live parts. The user could therefore touch the accessible live parts and receive an electric shock The product does not comply with the requirements of the Low Voltage Directive.
The product has an insufficient granular filler of the fuse. Consequently, if a fault occurs during use, the fuse may fail to prevent fire and explosion. Additionally, the mains plug does not meet the dimensional requirements. If there is a fault with the product, it could overheat and catch fire. The product does not comply with the requirements of the Low Voltage Directive.
The plastic material of the product has an excessive concentration of dibutyl phthalate (DBP) (measured value up to 9.7% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and diisobutyl phthalate (DIBP) (measured values up to 10.1% and 39.2% by weight, respectively). These phthalates may harm the health by causing possible damage to the reproductive system. These phthalates may pause a risk to human health and the environment. The product does not comply with the REACH Regulation.
The plastic material of the product has an excessive concentration of diisobutyl phthalate (DIBP) and dibutyl phthalate (DBP) (measured values up to 9.7% and 1.08% by weight, respectively). These phthalates may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the REACH Regulation.
The product has insufficient mechanical strength and there is insufficient nominal cross-section of the conductors. There is a risk of fire and the user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
The material of which the balloons are made releases an excessive amount of nitrosatable substances and nitrosamines (measured values: 1.83 mg/kg and 0.14 mg/kg, respectively). Nitrosamines can cause cancer if swallowed or through skin contact. A child could be exposed to them if they touch the product or put it in their mouth. The product does not comply with the requirements of the Toy Safety Directive.
The toy has a small part (blue plastic ball) that can easily detach. A small child may put it in the mouth and choke. Moreover, the plastic bag packaging is too thin. If a child places the plastic bag over their head, they could suffocate. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product was supplied with an incorrect USB cable. This could lead to the cable overheating, igniting the pom-poms and causing a fire. The product does not comply with the requirements of the Low Voltage Directive.
The mains plug does not meet dimensional requirements and may not make a secure connection with the socket, leading to fire. Moreover, the fuse lacks any granular filler and might fail, posing a risk of the product overheating or exploding. The product does not comply with the requirements of the Low Voltage Directive.
The product is supplied with a plug which does not contain a fuse link. The fuse is required to ensure the safe operation of the fuse under fault conditions, and its absence could lead to the plug overheating and/or exploding. Moreover, the separate adaptor supplied with the product also does not meet the dimensional requirements, leading to a risk of fire. The product does not comply with the requirements of the Low Voltage Directive.
The mains plug does not meet dimensional requirements and may not make a secure connection with the socket, leading to fire. Moreover, the plug's fuse lacks any granular filler and might fail, posing a risk of the product overheating or exploding. The product does not comply with the requirements of the Low Voltage Directive.
The rear axle joints may not have been tightened to the required torque during assembly. If an affected joint comes loose completely, the driver may notice a misalignment of the steering wheel when driving straight. In severe cases, the joint may fail without warning, resulting in a rear wheel losing directional control. Although the brakes remain functional, this instability could increase the risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product contains excessive amounts of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values up to 0.12% and 31.6% by weight, respectively). These phthalates may pose a risk to human health and the environment. Moreover, the product has an excessive concentration of cadmium (measured value: 8.1% by weight). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. The product does not comply with the REACH Regulation.
The product contains formaldehyde (measured value: up to 110 mg/kg). Formaldehyde is a skin sensitiser and can trigger allergic reactions and may cause cancer. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation.
The product's fuse is incorrectly rated and may not operate as intended to prevent overheating, which could lead to explosion, fire, and burns to the user. Moreover, the dimensions of the mains plug are incorrect and the insulation between the input and output circuits is insufficient. The user can therefore receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
Vehicles fitted with the GSE T4 DOHC 1.5 l (160 hp) engine may suffer engine damage due to deformation or breakage of the connecting rod, resulting from abnormal combustion. This may cause the vehicle to catch fire while in operation. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal soldering residues may pass into the unit. This can cause internal electric short circuits which, can lead to continuous power supply and overheating due to a blocked relay, and cause a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a defect in the engine control unit (inverter) in the vehicles equipped with electrified dual-clutch transmission (e-DCT), metal soldering residues could pass into the unit. This can cause internal electric short circuits which can lead to continuous power supply and overheating due to a blocked relay, causing a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a failure with the Printed Circuit Board (PCB), the product may overheat, melt or generate smoke, which lead to the user suffering burns. The product does not comply with the requirements of the Low Voltage Directive.
The fibrous stuffing material of the toy is easily accessible. A small child could put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The fibrous stuffing material of the toy is easily accessible. A small child could put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the relevant European standard EN 71-1
When a speed limit is set using the Speed Limiter Mode, certain throttle lever sequences may override it. This can result in unexpected speed and acceleration, increasing the risk of loss of control and injuries The product does not comply with the Regulation on the approval and market surveillance of agricultural and forestry vehicles.
Internal wires can become detached and touch the metal plate, exposing the user to electric shock. Moreover, if the power cable touches the hot plate, it may be damaged and pose an electrical hazard. Furthermore, the insulation between the live components and the metal plate is insufficient, increasing the risk of electric shock. Additionally, a decorative part of the hair straightener (the screw cover) can easily be detached and could be swallowed by a child. The product does not comply with the requirements of the Low Voltage Directive.
The product has an excessive volume of nicotine-containing liquid (12 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The product may not hold the claimed weight without bending or collapsing. If the user uses the ladder extended to full length, it may become unstable or collapse, causing the user to fall and suffer injuries. The product does not comply with the General Product Safety Regulation.
Due to incorrect adjustment of the product as a result of the lack of instructions, the baby may slip out, fall and suffer serious injuries. The product does not comply with the General Product Safety Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA – Lilial), which is prohibited in cosmetic products. BMHCA may damage the reproductive system, harm the health of the unborn child and cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The product has an excessive volume of nicotine-containing liquid (28 ml) and an excessive concentration of nicotine (up to 50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The product is not protected against moisture, despite being recommended for outdoor use. Moreover, the product has an insufficient nominal cross-section of the conductors and insufficient design, where the extension socket allows a single-pole plug to be inserted. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
The product has insufficient mechanical strength, insufficient nominal cross-section of the conductors and insufficient length of the cable between the plug and the first bulb. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
The toy contains small magnets with a high magnetic flux (measured value up to 0.76 T²mm²). If a child swallows the magnets, they could attract one another causing intestinal blockage or perforation. Moreover, the bag of the packaging is non-permeable and its closing includes drawstrings. If a child plays with it and tightens the drawstrings, the material can cover the mouth and nose, causing the child to suffocate. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The solders in the product have an excessive concentration of lead (measured value up to 14 %). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 43 %). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The product has insufficient mechanical strength and the cross-section of the wires is too small. Additionally, the structure of the cord extension socket allows single-pole insertion of plugs. Therefore, the user could touch accessible live parts, and receive n electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
The solders in the product have an excessive concentration of lead (measured value up to 49 %). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 42 %). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders have an excessive concentration of lead (measured value up to 36 %). Lead poses a risk to the environment. The product in the product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders have an excessive concentration of lead (measured value up to 12 %). Lead poses a risk to the environment. The product in the product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 12 %). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 37 %). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 42% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The leather in the product contains chromium VI (measured value: 15.1 mg/kg). Chromium (VI) is sensitising, can trigger allergic reactions and can cause cancer. The product does not comply with the REACH Regulation nor with the the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
The solders in the product have an excessive concentration of lead (measured value up to 80 % by weight). Lead poses a risk to the environment. Moreover, the plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 7.5 % by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the REACH Regulation.
The solders in the product have an excessive concentration of lead (measured value up to 42 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 10.66 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead and cadmium. (measured values up to 86% and 0.22% by weight, respectively). The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 13% and 0.7% by weight, respectively). These phthalates may harm the health by causing possible damage to the reproductive system. Lead and cadmium pose a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the REACH Regulation.
The solders in the product have an excessive concentration of lead. (measured value: 14 % by weight). Moreover, the plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 3.9 % by weight). This phthalate may pose a risk to human health and the environment. Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the REACH Regulation.
The solders in the product have an excessive concentration of lead. (measured value: 0.17% by weight). The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 3.8% and 2% by weight, respectively). These phthalates may pause a risk to human health and the environment. Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the REACH Regulation.
The toy includes small parts (small potato balls). Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The plastic of the toy contains excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 16.41% by weight). This phthalate may harm the health of children, causing potential damage to the reproductive system. The product does not comply with the REACH Regulation.
The toy has small parts (the eyes) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (the eyes) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product has an excessive volume of nicotine-containing liquid (40ml) and an excessive concentration of nicotine (50mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The insulation of the product as well as the creepage distances between the primary and secondary circuits are not sufficient. The user can therefore touch live parts and receive an electric shock. Moreover, the cable of the product might overheat and melt, which could lead to burns. The product does not comply with the requirements of the Low Voltage Directive.
The product has an excessive volume of nicotine-containing liquid (35ml) and an excessive concentration of nicotine (50mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (30ml) and an excessive concentration of nicotine (50mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The plug face does not meet the dimensional requirements. As a result, the plug may overheat and/or explode. There is a risk of fire. This product does not comply with the requirements of the Low Voltage Directive.
In the event of airflow getting obstructed during use, the appliance could overheat. Consequently, the heating element may cut out while the motor continues to run, causing the casing to become excessively hot and leading to internal thermal damage. This overheating can ignite nearby object, leading to a risk of fire. The product does not comply with the requirements of the Low Voltage Directive.
The toy has a small part (the ear of the pop-up bunny figurine) that can easily detach. Small children may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The plastic material of the transparent from and pink back of the toy has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 21.7% by weight). DEHP may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
The plug fuse has insufficient granular filler, and the plug face does not meet the dimensional requirements. As a result, the plug may overheat and/or explode. There is a risk of fire. Improvements are also required to product documentation and marking. This product does not comply with the requirements of the Low Voltage Directive.
The product is not protected against moisture, despite being recommended for outdoor use. Consequently, water could penetrate the product and cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
There is insufficient creepage and clearance distance between circuits and the product has insufficient insulation. The user can access live parts and receive an electric shock. Additionally, if the power cable touches the metal plate, it may be damaged and pose an electrical hazard. Moreover, the handle of the product can overheat and cause burns to the user. This product does not comply with the requirements of the Low Voltage Directive.
The product may collapse when in use, causing the user to fall and suffer injuries. The product does not comply with the General Product Safety Regulation.
The plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 10 % by weight). This phthalate poses a risk to human health and the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The total filtration capacity of the mask is insufficient (measured values as low as 79%). Consequently, the product does not fulfil the health and safety requirements. Thus, even if combined with other recommended measures, it may not properly protect. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with European standard EN 149.
The carbon rims may have internal cracks that can lead the rims to break or deform. If a relevant load is placed on the bicycle this can cause the user to fall and be injured. The product does not comply with the General Product Safety Regulation.
The mechanical strength of the power supply housing is inadequate. Moreover, the product is not protected against moisture. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 606598.
The mechanical strength of the power supply housing is inadequate. Moreover, the product is not protected against moisture. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.