Instant water heater
Due to incorrect design of the product, water floods the live parts of the electrical wires. This can cause users to receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
RecallLookupÜrün denetleyicisine geri dönEU Safety Gate · 2026-01-01 →
Doğrulanmış geçmiş AB Güvenlik Kapısı uyarılarına göz atın. Her giriş, tanımlanmış resmi kaynağına bağlantı verir.
Due to incorrect design of the product, water floods the live parts of the electrical wires. This can cause users to receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The baby wrap does not come with instructions for use. This could lead to a child not being properly secured in the baby carrier, with the risk of falling and being injured. The product does not comply with the General Product Safety Regulation.
The terminal block of the lamp is not permanently attached to the product's housing. The wires may become loose and can come into contact with the metal parts of the lamp, causing the metal parts to become live. The user could therefore touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-1.
The product is microbiologically contaminated with mesophilic aerobic bacteria, molds, and yeasts, including the yeast Candida albicans. The microorganism may cause illness in some consumers, particularly those with a weakened immune system. The product does not comply with the Cosmetic Products Regulation.
The insulation between live parts (primary circuit) and accessible parts (secondary circuit) is not adequate. Additionally, the internal transformer is not sufficiently insulated. Moreover, due to a default in the electronic component (optocoupler), an abnormal flow of current may occur, The user may therefore receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 61558-2-16 and EN 61558-1
In case of obstruction of the air inlet, the product can overheat and melt and cause a fire. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60335-2-23.
The distances and protection between primary and secondary circuits are insufficient, which could cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 61558-2-16 and EN 61558-1.
The product can overheat during use leading to the product melting, causing burns to the user and fire. The product does not comply with the requirements of the Low Voltage Directive
The toy has small parts (the eyes and nose) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The insulation and dimensions of the power socket of the product are inadequate. The user could touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335.
The product is not protected against moisture, despite being recommended for outdoor use. Consequently, water could penetrate the product and cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
The product has insufficient mechanical strength, insufficient nominal cross-section of the conductors and insufficient length of the cable between the plug and the first bulb. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
There is a combined risk that the torque applied to the hub nut of the rear axle could loosen it and that in some of the relevant trucks the hub nut is not crimped. A warning light for the ABS braking system could light up on the instrument panel. Abnormal vehicle noise and vibration might also occur. The wheel hubs might disconnect from the rear axle of the truck, which may lead to accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The toy has small parts (the magnet from the fishing rod and the fish) that can easily detach. A small child could put them in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive or with European standard EN 71-1.
The inflator in the driver airbag has a laser-welded internal seal (left side) that may not reliably hold during deployment. This may lead to a risk that the airbag module could become separated from the steering wheel when it is activated. This can cause metal fragments to be projected at great speed through the airbag into the interior of the vehicle, which can result in serious and even fatal injuries for the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A brake line connector that has not been tightened could lead to leakage of brake fluid, which would result in failure of the braking system, making it impossible to brake, leading to accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The toy has small parts (eyes) that can easily detach and the fibrous stuffing material of the toy is easily accessible due to the weakness of certain seams. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the relevant European standard EN 71-1.
A weld stud of insufficient strength on the third-row seatbelt anchorage bracket may result in the restraint system not functioning correctly in the event of an accident and affect occupant protection, leading to a risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
An insufficiently screwed-on brake caliper bracket can lead to brake failure. The brake caliper may become detached from the axle due to insufficient tightening torque of the rear brake caliper mounting screws. This could lead to damage to or breakage of the brake hose, resulting in a sudden leak of brake fluid and reduced braking performance. The low brake fluid level warning indicator lights up, accompanied by a corresponding indication in the instrument cluster. This may lead to accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product has small parts (silicone plug, handle) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the General Product Safety Regulation nor with the European standard EN 14350.
Vehicles may be fitted with cylinder blocks which are missing a cooling nozzle. If a cooling nozzle is missing, the piston may not be cooled down sufficiently, potentially causing it to weaken, warp or break. This could lead to sudden engine failure, causing power transmission loss. This could also trigger thermal runaway leading to fire and injuries of the passengers. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
At extremely high speeds a separation within the crown area of the tyre is possible. The tyre tread could deform with a local increase of diameter and could create interference with the car. This condition could cause a loss of vehicle control and increase the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The label on the Elsa shower puff included in the set has an excessive concentration of phthalates. Phthalates may harm the health of children, possibly causing damage to the reproductive system. The product does not comply with the REACH Regulation.
The cans leak and sometimes burst, which can cause serious injuries. The product does not comply with the requirements of the Aerosol Dispensers
The fireworks may burst or eject burning material outside the designated safety distance of 8 m or below a height of 3 m, causing injuries and/or burns and/or a fire to the user or bystanders. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
The fireworks may burst or eject burning material outside the designated safety distance of 8 m or below a height of 3 m, causing burns or eye injuries. Moreover, the article does not extinguish after functioning within 120 seconds, which may cause fire to surrounding objects The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947-5.
The product contains perfluorocarboxylic acid related compounds (PFCAs) and an excessive quantity of perfluorooctanoic-acid-related compounds (PFOAs) (measured values up to 463.4 mg/kg and 302.5 μg/kg, respectively). PFCAs bio-accumulate in wildlife and humans, posing a risk to human health and the environment, while PFOAs are carcinogenic and pose a risk to the environment. The product does not comply with the REACH Regulation not with the Persistent Organic Pollutants (POPs) Regulation.
The product contains an excessive quantity of perfluorooctanoic-acid-related compounds (PFOAs) (measured value up to 203 μg/kg). PFOAs are carcinogenic and pose a risk to the environment. The product does not comply with the Persistent Organic Pollutants (POPs) Regulation.
The dark grey and dark with a grey polar fleece lining parts of the handbag has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 0.18% and 0.13% by weight, respectively) These phthalates may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
The sleeping bag has a hood, which may cover the mouth and/or nose area of the baby. This could lead the child to suffocate. The product does not comply with the General Product Safety Regulation nor with the European standard EN 16781.
The migration of boron from the toy slime is too high (measured value up to 1314 mg/kg). Ingestion or contact with an excessive quantity of boron may harm the health of children by damaging their reproductive system The product does not comply with the requirements of the Toy Safety Directive nor the European standard EN 71-3.
The earthing contact is not properly connected to all sockets. Additionally, the cable’s cross-sectional area is too small and cables/conductors are connected by soft soldering that creates a risk of the connections detaching. Consequently, there is a risk of fire and/or electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the standard EN 60320-1.
In vehicles fitted with a DV5 diesel engine, the NOx sensor may not have been properly tightened during installation. This may allow exhaust gases to enter the engine compartment and could result in visible exhaust fumes around the engine area, overheating of nearby components, a risk of fire, and increased NOx emissions. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
In vehicles fitted with a DV5 diesel engine, the NOx sensor may not have been properly tightened during installation. This may allow exhaust gases to enter the engine compartment and could result in visible exhaust fumes around the engine area, overheating of nearby components, a risk of fire and increased NOx emissions. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
In vehicles fitted with a DV5 diesel engine, the NOx sensor may not have been properly tightened during installation. This may allow exhaust gases to enter the engine compartment and could result in visible exhaust fumes around the engine area, overheating of nearby components, a risk of fire, and increased NOx emissions. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The total filtration capacity of the mask is insufficient (measured mean values: 32.3%). Consequently, the product does not fulfil the health and safety requirements. Thus, even if combined with other recommended measures, it may not properly protect. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standard EN 149.
Vehicles without a bulkhead were manufactured and supplied with a single instead of a double seatback. There is a risk of excessive movement of the seatback in the event of a rear-end collision, which could result in the driver being thrown out and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
In vehicles fitted with a DV5 diesel engine, the NOx sensor may not have been properly tightened during installation. This may allow exhaust gases to enter the engine compartment and could result in visible exhaust fumes around the engine area, overheating of nearby components, a risk of fire, and increased NOx emissions. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Vehicles without a bulkhead were manufactured and supplied with a single instead of a double seatback. There is a risk of excessive movement of the seatback in the event of a rear-end collision, which could result in the driver being thrown out and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Vehicles without a bulkhead were manufactured and supplied with a single instead of a double seatback. There is a risk of excessive movement of the seatback in the event of a rear-end collision, which could result in the driver being thrown out and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The plastic bag packaging is too thin. If a child places the plastic bag over their head, they could suffocate. The product does not comply with the requirements of the Toy Safety Directive.
The lunchbox has a 3-pin connection socket. If users use a conventional C7 socket instead of the provided power cable, the third pin is accessible. Users may touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60335-2.
The mains plug of the product does not meet the dimensional requirements. The socket shutters can get stuck in an open position, and the user could receive an electric shock from accessible live parts. There is insufficient creepage and clearance distance between circuits, and it does not meet required insulation requirements. This can lead to the user receiving an electric shock from accessible live parts. The product does not comply with the Low Voltage Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (30 ml) and an excessive concentration of nicotine (50 mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. Additionally, the product lacks an information leaflet. As a consequence, consumers cannot make informed decisions regarding the safe use of the product. The product does not comply with the requirements of the Tobacco Products Directive.
The plug of the product does not meet the dimensional requirements and may not make a secure connection with the socket. It is also fitted with a counterfeit fuse. This could lead to the plug overheating and/or exploding. The product does not comply with the requirements of the Low Voltage Directive
The wires of the product are soldered directly to the circuit board without proper support, so vibrations or shocks could loosen the battery’s thermal protection, causing overheating and a fire. Also, the plug does not meet the required dimensions and may not fit securely in a socket, which could also lead to overheating and fire. The product does not comply with the requirements of the Machinery Directive.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The product contains formaldehyde (measured value up to 152 mg/kg). Formaldehyde is a skin sensitiser and can trigger allergic reactions and may cause cancer. The product does not comply with the REACH Regulation.
The textile label on the product contains chromium VI (measured value: 0.12 mg/kg). Chromium (VI) is sensitising, can trigger allergic reactions and can cause cancer. The product does not comply with the requirements of the Toy Safety Directive or with the European standard EN 62115.
The toy contains a small part (a metal ring). A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (the eyes) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product has an excessive concentration of cadmium (measured value up to 92% by weight). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. This product does not comply with the REACH Regulation.
The product contains an excessive amount of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and diisononyl phthalate (DINP) (measured values: 1,849 mg/kg, 1,200 mg/kg and 1,200 mg/kg, respectively). These phthalates may harm the health of children by causing possible damage to their reproductive system. The product does not comply with the REACH Regulation.
The toy contains a small part (a metal ring). A small child may put it in the mouth and choke The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The solders have an excessive concentration of lead (measured value up to 54.8% by weight). Lead poses a risk to the environment, and it is harmful to human health, accumulates in the body, can cause developmental neurotoxicity and may affect breast-fed or unborn children. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The heating element is easily accessible from the appliance’s air outlet. Moreover, if the air inlet is partially obstructed, the appliance may overheat, leading the plastic casing to melt and split, producing a flame and drops of burning plastic, giving direct access to live parts. Furthermore, if the heating element breaks, it may come into contact with the metal parts accessible from the outside. Additionally, the wires soldering can easily deteriorate. Users may access live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The product's power supply has structural flaws. A child might touch a part of it that has high voltage and receive an electric shock. The product does not comply with the requirements of the Radio Equipment Directive (RED).
The charger lacks current protection. If the consumer is charging the product and there is a failure within the electrical system, the product may set fire and/or explode. The product does not comply with the requirements of the Machinery Directive.
The toy has a small part (metal key clip with ring) that can easily detach. A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The solders in the product have an excessive concentration of lead (measured value up to 36.1 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronical equipment (RoHS 2 Directive).
A manufacturing defect in the tyres can cause a crack in their sidewall. Over time, this crack can grow and lead to a sudden loss of air pressure. If this happens while driving, it may affect vehicle control, especially since the tyres are on steered axles. This increases the risk of accidents and could result in injuries to occupants or other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The plastic material of the transparent plastic window of the carrying bag and the black grip of the rackets contain an excessive amount of bis(2-ethylhexyl) phthalate (DEHP) (measured values up to 25% by weight). This phthalate may harm the health by causing possible damage to reproductive system. The product does not comply with the REACH regulation.
The product has small parts (suction cups) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The toy has small parts (the eyes and rattle) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The product is insufficiently protected against moisture. Consequently, water could penetrate the product and cause an electric shock. Moreover, due to the inadequate insulation, a short circuit could cause a risk of fire. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 61347.
The toy contains small magnets with a high magnetic flux (measured value up to 1.86 T² mm²). If a child swallows the small magnets, they could attract one another causing intestinal blockage or perforation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
According to the list of ingredients the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The battery compartment can easily be opened without the use of any tools, and the batteries inside are easily accessible. If a child puts them in the mouth, the battery can overheat and release electrolytes, which can be ingested by the child and cause damage to the gastrointestinal tract. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 62115.
According to the list of ingredients the product contains 2-(4-tert- butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients the product contains 2-(4-tert- butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The adaptor has an earthed socket, but it uses a two-pin plug and has no protective conductor. This means a class I appliance can be connected without proper earthing. If a fault occurs, the connected appliance could become live, and the user could receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62368-1
The product's plastic casing is not sufficiently resistant to high temperatures and may catch fire and burn. The product does not comply with the requirements of the Low Voltage Directive, nor with the European standards EN 60335-2-9 and EN 60335-1.
The adaptor has an earthed socket, but it uses a two-pin plug and has no protective conductor. This means a class I appliance can be connected without proper earthing. If a fault occurs, the connected appliance could become live, and the user could receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62368-1
The adaptor has an earthed socket, but it uses a two-pin plug and has no protective conductor. This means a class I appliance can be connected without proper earthing. If a fault occurs, the connected appliance could become live, and the user could receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62368-1
According to the list of ingredients the product contains 2-(4-tert- butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The play sand contains asbestos fibres (measured value up to 0.1% by weight). Asbestos could cause cancer. The product does not comply with the requirements of the Toy Safety Directive.
The product is not adequately insulated. The user could have access to live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 61558-2-16 and EN 61558-1.
The toy has small parts (eyes) that can easily detach. Furthermore, the fibrous stuffing material of the toy is easily accessible. A small child could put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the relevant European standard EN 71-1.
The toy has small parts (such as the wheels and the chimney cap) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (such as the wheels and the driver's head and hand) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product is not adequately insulated. The user could have access to live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 61558-2-16 and EN 61558-1.
The deployment of the ammonium nitrate inflator can cause it to burst when there has been a degradation of the propellant. Such a rupture of the inflator can cause metal fragments to be projected at great speed through the airbag into the interior of the vehicle, which can result in serious and even fatal injuries for the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product emits an excessive concentration of carbon monoxide in the exhaust gas (measured value up to 0.15%). This can lead to carbon monoxide poisoning when the stove is used in unventilated areas. Carbon monoxide poisoning is life threatening. The product does not comply with the Regulation on appliances burning gaseous fuels (GAR).
The fireworks may burst or eject burning material outside the designated safety distance of 8 m or below a height of 3 m, causing burns or eye injuries. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947-5.
The fireworks may burst or eject burning material outside the designated safety distance of 8 m or below a height of 3 m, causing injuries and/or burns and/or a fire to the user or bystanders. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
The construction is not secure enough and the seat can separate from the frame. This can lead to the child falling on the floor resulting in injuries. The product does not comply with the General Product Safety Regulation.
The fireworks may burst or eject burning material outside the designated safety distance of 8 m or below a height of 3 m, causing injuries and/or burns and/or a fire to the user or bystanders. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
After reaching a power of 2000 W, the motor of the product emits flames and glowing particles, which could cause burns to the user or lead to a fire. The product does not comply with the requirements of the Machinery Directive nor with the European standard EN 62841.
The battery management system of the product lacks a cell temperature monitoring device. Therefore, the product can overheat and cause burns. The product does not comply with the requirements of the Radio Equipment Directive nor with the European standard EN 62368-1.
The reaction to fire of the insulation material is lower than that stated in the Declaration of Performance. This may contribute to the spread of fire. The product does not comply with the Construction Products Regulation nor with the European standard EN 13501.