RecallLookupÜrün denetleyicisine geri dönEU Safety Gate · 2026-01-01 →
Doğrulanmış geçmiş AB Güvenlik Kapısı uyarılarına göz atın. Her giriş, tanımlanmış resmi kaynağına bağlantı verir.
The product presents a serious risk of fire because there is a lack of thermal protection, which could lead to overheating. Additionally, in case there is no water in it when it is plugged in and charging, it may ignite, leading to a risk of fire. The product does not comply with the requirements of the Low Voltage Directive
The toy contains small parts (rings) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1
The sky lantern ascends in an uncontrolled way and is blown by the wind without control. It may land anywhere when the flame has not yet gone out, come into contact with flammable objects and ignite them, causing a fire. The product does not comply with the General Product Safety Regulation.
The article has too many duds with and without fuse, users can ignite them causing injuries and/or burns. Additionally, the fireworks may burst or eject burning material outside the designated safety distance of 8 m or below a height of 3 m, causing fire or injuries and/or burns to the user or bystanders. Moreover, the article does not extinguish after functioning within 120 seconds, which may cause fire to surrounding objects. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
The cream does not provide the announced level of Sun Protection Factor (SPF). Consumers may therefore suffer sunburn and the chronic consequences of excessive sun exposure through the UV radiation contained in sunlight when using the product, including immunosuppression, skin ageing and skin cancer. The product does not comply with the Cosmetic Products Regulation.
The fireworks may burst or eject burning material outside the designated safety distance of 8 m or below a height of 3 m, causing injuries and/or burns to the user or bystanders. Furthermore, the sound pressure level is too high, which can cause damage to hearing. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
The product might explode during normal use. In addition, the article has a too long fuse delay. This may cause the user to walk to the article too early with the danger that fireworks could hit the user, causing injuries and/or burns. Additionally, the fireworks may burst or eject burning material outside the designated safety distance of 8 m or below a height of 3 m, causing fire or injuries and/or burns to the user or bystanders. Moreover, the article does not extinguish after functioning within 120 seconds, which may cause fire to surrounding objects. Furthermore, the sound pressure level is too high, which can cause damage to hearing. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
The toy has small parts (eyes and nose) that can easily detach. A small child may put them in the mouth and choke. Moreover, the fibrous stuffing material of the toy is easily accessible. A small child could put it in the mouth and choke. Additionally, the suction cup of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 16% and 11% by weight, respectively). These phthalates may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation and the European standard EN 71-1.
The article has too many duds with and without fuse, users can ignite them causing injuries and/or burns. Additionally, the fireworks may burst or eject burning material outside the designated safety distance of 8 m or below a height of 3 m, causing injuries and/or burns to the user or bystanders. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
During use, the thermostat in the appliance may short-circuit, producing dangerous amounts of flames and smoke. The user may try to extinguish the fire. They may sustain burns if their clothes catch fire. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and 60335-2-15.
The fireworks may burst or eject burning material outside the designated safety distance of 8 m or below a height of 3 m, causing injuries and/or burns to the user or bystanders. Furthermore, the sound pressure level is too high, which can cause damage to hearing. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The laser beam is too powerful. Direct viewing of it could cause damage to sight. Moreover, the product is not accompanied by the necessary warnings regarding its use. The product does not comply with the General Product Safety Regulation nor with the European standard EN 60825-1.
Because the safety mechanisms are easily bypassed, and because of the lack of a base plate, direct access to laser radiation during operation is possible. Looking directly into the laser beam or exposure via scattered radiation could damage a person’s sight. The product does not comply with the requirements of the Machinery Directive nor with the European standard EN 60825-1.
The plastic material of the product contains an excessive amount of dibutyl phthalate (DBP) (measured value up to 36.3% by weight). This phthalate may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the REACH Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl)propionaldehyde (BMHCA - Lilial) and 3- and 4-(4-hydroxy-4-methylpentyl) cyclohex-3-ene-1-carbaldehyde (HICC), which are prohibited in cosmetic products. BMHCA may damage the reproductive system, harm the health of the unborn child and cause skin sensitisation, while HICC causes contact allergies. The product does not comply with the Cosmetic Products Regulation.
The product contains asbestos fibres. Asbestos causes cancer. The product does not comply with the requirements of the Toy Safety Directive.
The product has an excessive concentration of cadmium and lead (measured values: 42% and 0.25% by weight, respectively). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. Lead is harmful to human health, accumulates in the body, can cause developmental neurotoxicity and may also affect breast-fed or unborn children. The product does not comply with the REACH Regulation.
According to the list of ingredients, both products contain 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA - Lilial), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the products contain 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA - Lilial), which is prohibited in cosmetic products. BMHCA can damage the reproductive system, harm the health of an unborn child and cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The product contains PFAS (man-made forever chemicals) (total measured value up to: 41 mg/kg). These chemicals pose a risk to the environment and human health, as they can cause developmental and reproductive toxic effects and are carcinogenic. The product does not comply with the REACH Regulation.
The product lacks appropriate instructions for safe use and the necessary labelling. Moreover, the product contains linalool, but its presence is not indicated in the list of ingredients. Consumers are not aware of their presence, and may suffer allergic reactions or skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The tightening of the ball joint nuts of the front lower control arm may be insufficient due to a processing defect. The first signs thereof are an abnormal noise (clicking and/or knocking sounds) detected at low mileage. One of the connections between the wheel and the frame of the vehicle may be lost, which could cause the vehicle to veer off course, leading to accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Because the safety mechanisms are easily bypassed, and because of the lack of a base plate, direct access to laser radiation during operation is possible. Looking directly into the laser beam or exposure via scattered radiation could damage a person’s sight. The product does not comply with the requirements of the Machinery Directive or with European standard EN 60825-1.
The supplied USB cable cannot handle outputs from standard USB power sources. This means it may melt when it is used to charge the product, and cause burn injuries to the user. The product does not comply with the requirements of the Radio Equipment Directive (RED).
A short circuit may occur from the power socket. There is a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The separator of the high voltage battery may be damaged. This may lead to cell failure and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The rate of nickel release is too high (measured value: 1.72 µg/cm²/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The solders in the product have an excessive concentration of lead (measured value up to 33.5% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive).
The glue has an excessive concentration of toluene (measured value: 8.7% by weight). Toluene is neurotoxic, if inhaled or in contact with the skin, and might also affect the unborn child. The product does not comply with the REACH Regulation.
When used in hot rooms, the LEDs in the ceiling lamp cannot dissipate the process heat and overheat, which can lead to the LED board and cover catching fire. The product does not comply with the requirements of the Low Voltage Directive.
The glitter varnish finish on the cover of the books is lifting and can be peeled off, generating small parts that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The sling can break during normal use and cause injuries to the user. The product does not comply with the requirements of the Machinery Directive nor with the European standards EN 818-1, EN 818-2, EN 818-4, EN 1677-1.
The swing has openings that can cause the child to fall and the head can be trapped in them, leading to strangulation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-8.
The solders in the product have an excessive concentration of lead (measured values up to 80% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured values up to 56% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured values up to 57% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders have an excessive concentration of lead (measured values up to 74% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
According to the list of ingredients the product contains 2-(4-tert- butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The rubber of the balloons releases an excessive amount of nitrosatable substances and nitrosamines (measured values up to 8.7 mg/kg and 4.3 mg/kg respectively). Nitrosamines can cause cancer if swallowed or through skin contact. A child could be exposed to them if they touch the product or put it in their mouth. The product does not comply with the requirements of the Toy Safety Directive.
The product has small parts (eyes) that can easily detach. A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The cable lacks proper anchoring and the accessible wires have inadequate insulation. The user could touch accessible live parts, which can lead to an electric shock. Moreover, the product is not protected against moisture, despite being recommended for outdoor use. Consequently, water could penetrate the product and cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
The lotion does not provide the announced level of Sun Protection Factor (SPF). Consumers may therefore suffer sunburn and the chronic consequences of excessive sun exposure through the UV radiation contained in sunlight when using the product, including immunosuppression, skin ageing and skin cancer. The product does not comply with the Cosmetic Products Regulation.
The solders have an excessive concentration of lead (measured values up to 82% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The protective conductor is not properly connected. Consequently, the user could touch live parts and receive an electric shock. The product does not comply with the requirements of the Machinery Directive, the Low Voltage Directive nor with the European standard 60335-1.
The toy has small parts (from the rattle) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The fork might delaminate causing it to brake due to hard braking force, the cyclist may fall and suffer injuries. The product does not comply with the General Product Safety Regulation.
Due to the combination of certain production and use conditions, an internal short circuit of a battery cell in the high-voltage battery might lead to a thermal event. There is a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product contains asbestos fibres. Asbestos causes cancer. The product does not comply with the requirements of the Toy Safety Directive.
The migration of chromium VI from the toy is too high (measured value: 0.12 /kg). Chromium (VI) is sensitising, can trigger allergic reactions and can cause cancer. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-3.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The toy could rupture and the filling of the inside could come out. The sand inside contains asbestos (measured value up to 5% by weight). Asbestos could cause cancer. The product does not comply with the requirements of the Toy Safety Directive.
The charger has insufficient insulation, leading to a risk of electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62368-1.
The cable is not properly anchored and the accessible wires have inadequate insulation. Moreover, the dimensions of the connection plug and socket do not comply with the specifications. The user could touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured values up to 26.2 % by weight). These phthalates may harm the health of children, causing possible damage to their reproductive system. Moreover, the product has an excessive concentration of lead (measured value up to 68.4 mg/kg by weight). Lead poses a risk to the environment. The product does not comply with the REACH Regulation.
One of the components of the product has an excessive concentration of bisphenol A (measured value up to 5% by weight). Bisphenol A has endocrine disrupting properties and affects the mammary glands, reproductive and immune systems and may impair brain's development and the behaviour. Additionally, the product lacks child-resistant fastening. Moreover, the labelling on the product does not include the appropriate hazard and warning information. The product does not comply with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 12% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the requirements of the Toy Safety Directive.
The sound pressure level is too high (measured value up to 122.8 dB), which can cause damage to hearing. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947-5.
The sling can break during normal use and cause injuries to the user. The product does not comply with the requirements of the Machinery Directive nor with the European standards EN 818-1, EN 818-2, EN 818-4, EN 1677-1.
The play sand contains asbestos fibres (measured value up to 2% by weight). Asbestos could cause cancer. The product does not comply with the requirements of the Toy Safety Directive.
The swing has openings that can cause the child to fall and the head can be trapped in them, leading to strangulation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-8.
The swing has openings that can cause the child to fall and the head can be trapped in them, leading to strangulation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-8.
The wicks of the candle can present excessive smoke, wax dripping, and flaming. Objects near the ignited candles can catch fire. The product does not comply with the General Product Safety Regulation.
The lorry may accelerate unexpectedly when a gear is selected or when the brake or parking brake is released, even without pressing the accelerator. This sudden movement increases the risk of collisions, which could result in serious or potentially life-threatening injuries to the driver, pedestrians, or others nearby. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The toy contains a small part (keyring) that can easily detach. A small child may put it in the mouth and choke. Moreover, in case of removal of the keyring, a sharp metal point becomes accessible, which may cause injuries to the user. This product does not comply with the requirements of the Toy Safety Directive.
The toy contains a metallic foreign body which could cause cuts to children. The product does not comply with the requirements of the Toy Safety Directive nor with the European standards EN 71-1, EN 71-2 and EN 71-3.
The handle has a design defect which can cause it to detach during use. Risk of burns and injuries. The product does not comply with the General Product Safety Regulation.
The article has too many duds with and without fuse, users can ignite them causing injuries and/or burns. Additionally, the fireworks may burst or eject burning material outside the designated safety distance of 8 m or below a height of 3 m, causing injuries and/or burns to the user or bystanders. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.
A defect in the inflator of the driver airbag may cause uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The toy has sharp edges which may cause cuts. Moreover, there are accessible gaps between moving parts of the tricycle. A child's leg may become trapped there, leading to injuries. Finally, the plastic bag packaging is too thin. If a child places the plastic bag over their head, they could suffocate. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Due to a manufacturing error, a small part in the terminal mount may become loose. This could cause a short circuit in the battery, creating a risk of overheating or fire. If this happens, a red warning symbol will appear on the dashboard. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The solders in the product have an excessive concentration of lead (measured value up to 5.5% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 51% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 28% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The chemical substances in the inflators of the TAKATA PSDI4 airbags may deteriorate over time, particularly in warm, humid climates. This could cause the airbag to rupture with too much force in the event of an accident, which could lead to serious or even fatal injuries in the worst-case scenario. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product might overheat, which could cause the material close to the heating element to melt rendering the food unsafe for consumption. The product does not comply with the requirements of the Low Voltage Directive nor with the Food Contact Materials (FCM) Regulation.
The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The toy has a protruding part (metal axis of the left handle). A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product has small parts (suction cup tips) that can easily detach. A small child may put them in the mouth and choke. Additionally, the fibrous stuffing material of the soft parts of the toy is easily accessible. A small child could put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 71-1.
The toy has small parts (on the lid of the teapot and the fastenings on the storage case) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product has insufficient insulation. The user can access live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62776.
According to the list of ingredients, the product contains Diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
When the adjustable filters are set to the "MIN" or the "MAX" position, the sunglasses do not adequately filter out the light, which increases the risk of eye damage to users. The product does not comply with the requirements of the Personal Protective Equipment Directive (PPE) nor with the European standard EN 12312-1.
The product contains an excessive amount of lead (measured value: 2% by weight). Lead is harmful to human health, accumulates in the body, can cause developmental neurotoxicity and may also affect breast-fed or unborn children. The product does not comply with the REACH Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl)propionaldehyde (BMHCA - Lilial) and 3- and 4-(4-hydroxy-4-methylpentyl) cyclohex-3-ene-1-carbaldehyde (HICC), which are prohibited in cosmetic products. BMHCA may damage the reproductive system, harm the health of the unborn child and cause skin sensitisation, while HICC causes contact allergies. The product does not comply with the Cosmetic Products Regulation.
The product contains PFAS (man-made forever chemicals) (total measured value: 660 μg/kg) These chemicals can cause developmental and reproductive toxic effects and are carcinogenic. The product does not comply with the REACH Regulation.
The machine lacks a protective enclosure, and the laser head's cover leaves an open gap in the working space during operation. This can allow reflected laser radiation to escape and cause damage to the sight of the machine operator or third parties not wearing the provided protective glasses. The product does not comply with the requirements of the Machinery Directive nor with the European standards EN 60825-1 and EN 60825-4.
The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The leg openings of the product are too large and the fastening capacity is insufficient which may cause the baby to slip out, fall and suffer serious injuries. This product does not comply with the General Product Safety Regulation nor with the European standard EN 13209-2.
The circumference of the carrying bag loop is too long, which may lead to strangulation. Moreover, the product does not provide the necessary durability, which may lead to the baby falling, leading to injuries. The product does not comply with the General Product Safety Regulation nor with the European standard EN 16512.
The product has an excessive concentration of isopropanol (measured value up to 0.017% by weight). Isopropanol can cause serious eye irritation and may cause drowsiness or dizziness. The product does not comply with the REACH Regulation.
The charger has insufficient insulation, leading to a risk of electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62368-1.
Vehicles with unleaded lower main bearings can suffer serious engine damage if the engine oil is old or contaminated, or if unauthorised oils or filters are used. Poor lubrication can lead to overheating and seizing or breaking of internal engine parts. If a connecting rod breaks and the crankcase ruptures, there is an increased risk of fire. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The solders in the product have an excessive concentration of lead (measured value up to 21% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders have an excessive concentration of lead (measured value up to 40% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The product has long functional cords close to the neck. The cords may become trapped during various activities of a child, leading to injuries and/or strangulation. Moreover, the product is highly flammable. Children could wear the costume close to an ignition source and the costume could catch fire, resulting in burns. The product does not comply with the requirements of the Toy Safety Directive nor with European standards EN 71-1 and EN 71-2.
The toy has small parts (the nose) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The device’s internal electric wires are not sufficiently protected. The double-layer insulation is missing. Moreover, the space between the live wires and the accessible parts (such as the casing or the buttons) is too small. Additionally, some of the wires are held in place only by welding. These wires may become detached due to wear or vibrations, reducing the distance between the live parts and the accessible parts, increasing the risk of electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The toy has small parts (rivets) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.